22.Clean Sprayer with care. Use non-flammable solvents.
23.Do not smoke while spraying. Most solvents and coatings are highly flammable, particularly when sprayed.
24.Read all of the information concerning coating products and cleaning solvents. Chlorinated solvents (e.g.
25.Materials used when painting or cleaning may be harmful or fatal if inhaled or swallowed. Only use in an area with adequate ventilation. Use a respirator or mask when painting or using cleaning solvents.
26.Never release the sprayer lid while the cup is pressurized.
27.Never point a spray gun at a person or animal. Always properly mask all objects that are not to be painted.
NOTE: | Performance of the compressor (if powered by line voltage) |
| may vary depending on variations in local line voltage. |
| Extension cord usage may also affect tool performance. |
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code 25249.5, et seq.)
Unpacking
When unpacking, check to make sure the parts listed on pages 10, 11, and 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
SKU 90985 | Page 4 |