Harbor Freight Tools 92841 operating instructions Unpacking, Special Warnings About Paint Sprayers

Special Warnings About Paint Sprayers

Health and Safety Hazard	Nature and Cause of Hazard	Prevention of Hazard
	Spraying paints, solvents and	Never spray materials near fire, flame,
	thinners mixes them with oxygen in
		electrical spark or any ignition source.
	the air. This creates a more explosive
Risk of Explosion or Fire		Never smoke when spraying or in the vicinity of
	mixture than these materials in their	spraying. Never smoke in the work area.
from Flammable Materials.	fluid form. Rapid fires and explosions
	of these mixtures can cause death or	Always provide good ventilation during and
		after spraying to eliminate any enclosed
	severe injury as well as significant
		explosive atmosphere.
	property damage.
	Certain solvents, including 1,1,1-	Inform yourself by reading the information
	Trichloroethane and Methylene
		provided with each solvent before introducing
Risk of Fire or Explosion	Chloride can chemically react with
		to the sprayer. Never spray the solvents named
	the Aluminum used in this spray
from Materials		at left in this sprayer which contains Aluminum.
	equipment. This can cause an
Incompatible with		Never use these materials for cleaning
	explosion which may result in death
Aluminum.		equipment. Never use any solvent if in doubt of
	or serious personal or property injury.
		its composition or compatibility with Aluminum,
	Other chemicals ,when mixed, may
		other materials or this spraying equipment.
	cause unpredictable results.
		Use an ANSI approved ventilator or face mask.
	Inhaling solvents or sprayed materials	NOTE: Some face masks, such as paper filters
Inhalation Hazard.	may cause severe injury to the lungs	provide only limited protection against harmful
	or body, due to their chemical make	sprays and fumes. Consult safety documents
	up or the fact that they may coat the	provided with the materials you are spraying or
	interior of the lungs.	an industrial safety expert when determining
		the appropriate respiratory protection.
		Before doing any service to the sprayer,
	Many components of this tool and	disconnect it from the air supply. Then
		depressurize the sprayer by pointing it in a
	any air pressure powered tool are
		safe direction and holding the trigger until all
	under significant air pressure, even
		pressure is released.
Risk of Ejected Objects or	after the air supply is disconnected. A
		Never point the nozzle toward any person or
Sonic Injury.	significant risk of injury caused by	animal.
	ejected components or materials
		Always wear ANSI approved safety glasses or
	diverted by the stream of air pressure
		goggles when using or servicing this tool.
	exists. High pressure air escaping	Always wear hearing protection when using or
	suddenly may cause hearing injury.
		servicing this tool or any air pressure
		equipment.

Warning: The warnings, cautions, and instructions discussed in this instruc- tion manual cannot cover all possible conditions and situations that may oc- cur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the following parts are included.

LVLP Spray Gun

Paint Cup

If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

REV 04/05

SKU 92841 For technical questions, please call 1-800-444-3353 Page 4