Harbor Freight Tools 93205 Save This Manual, Safety Warnings and Precautions

Page 3

 

Specifications

 

 

Inlet PSI Range

50-70 PSI, 70 PSI Max.

 

 

Air Consumption

9.5 CFM @ 50 PSI

 

 

Paint Capacity

1 Quart

 

 

Air Inlet

1/4” - 18 NPS

Nozzle Size

.071”

 

 

Feed Type

Siphon

 

 

Material Types

Thin to medium viscosity materials:

Enamel, Lacquer, Polyurethane, Urethane, and Primer.

 

 

 

Fan Spread

1.5" – 9.5"

 

 

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use air tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.

6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

REV 04/06

SKU 93205

For technical questions, please call 1-800-444-3353;

Page 3

Troubleshooting section at end of manual.

 

 

Image 3
Contents 93205 For technical questions and replacement parts, please callContents Safety Warnings and Precautions Read all instructions before using this toolSave This Manual For technical questions, please call For technical questions, please call Air Connection General tips for Preparation Comparison Conventional versus Hvlp Spray GunsFan Direction and Pattern Adjustment Pattern AdjustmentFan Direction Too Coarse Correct Too Fine Tighten Loosen Techniques SKU For technical questions, please call After each usePlease Read the Following Carefully Assembly Diagram Spray Pattern Diagnosis ProblemSputtering Spray Problem Cause Solution