COBY electronic TF-DVD7060 Getting Started, Power Supply Using the AC Power Adapter

GETTING STARTED

Remote Control

•Refer to the diagram. Remove the battery compartment cover located on the rear of the remote control. Insert batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace

the cover.

•To use the remote, point it at the remote sen-

sor of the player. Operate the remote within 15 feet of the sensor and at an angle of +/- 60 degrees.

•Batteries in the remote will last for approxi-

mately 1 year. Replace the batteries if the	2 x “AAA” 1.5V batteries
remote control does not work. Do not mix
old with new batteries, or different types of
batteries.

•Remove the batteries from the remote if it will not be used for a long period of time.

WARNING

•The battery used in this device may present a fire or chemical burn if mistreated. Do not recharge, disassemble, incinerate, or heat the battery (~212ºF).

•Keep batteries away from children.

Power Supply

Using the AC Power Adapter		AC adapter:
		This AC adapter operates on
This AC adapter should be used with		100-240V~~50/60Hz 2A Min
100-240V 50/60Hz AC wall outlets.	To DC 9V IN	DC OUT: 9V
		DC current: 2.0A Min

• DC Out: 9V

•DC Current: 2.0A min.

Caution:

•Do not connect the power plug to a power outlet other than that which is indicated here and on the label as this may result in the risk of fire or electric shock.

To wall outlet (100-240V 50/60Hz)

•Do not handle the power plug with wet hands. Doing so may cause electric shock.

•Only use AC adapters of the type specified here. Failure to do so may case a fire or damage the player.

14