Pressure Transducer Seal
Installation
1.Lightly coat cleaned packing recess in manifold with a light grease or oil.
2.Heat seal (69) in hot water for several minutes.
CAUTION
Excess pressure from the probes or fingernails will damage the packing and cause subsequent leakage.
3.Use a blunt wooden or plastic probe and install seal (69) into recess in manifold (229). Be careful not to cause kinks or bends in packing during installation.
4.Lightly grease or oil transducer (67) and install pump (18). See page 11.
69
229
Fig. 16 | 9666A |
309067 17