Campbell Hausfeld HV2100, HV2105 operating instructions Hvlp Paint Sprayers

Page 11

Operating Instructions and Parts Manual

HV2100, HV2105

 

 

HVLP Paint Sprayers

Maintenance (Cont.)

necessary to remove the tip/nozzle and needle for cleaning, the following procedure should be used:

a.Unscrew the material flow knob. Remove the needle spring, and then withdraw the needle.

b.Remove the tip.

c.Clean both tip and needle using cleaner or water and a brush.

d.Reassemble all parts, making sure that all washers and gaskets are replaced correctly.

e.Oil the needle spring and put a spot of oil on the gland seal to prevent the needle from sticking. To adjust the gland nut, tighten until needle sticks, and then slacken off by about 1/8 turn.

f.Check the cup top gasket and replace if damaged. Always seat the cup top gasket flat in the cup groove. Failure to do this will allow the cup to drip and impair the spray pattern due to loss of pressure.

g.Lubricate all threads to ensure smooth operation.

Blockages and or leaks may occur if the gun is left on its side or turned upside down. Always hang the gun by the hook when not in use.

www.chpower.com

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operating Instructions and Parts Manual HV2100, HV2105Description Table of ContentsSafety Guidelines General Safety InformationLength of Cord Gauge Grounding InstructionsPreparing to USE Your Hvlp Turbine System How Your Hvlp System WorksHow Your Hvlp Spray Gun Works Pre-OperationTip/Needle Size Application Air Cap CoatingsSpray Patterns Using Your Spray GUNOperation Preparing to SprayRunning Multiple Spray Guns with a Turbine Spraying TechniqueAdditional Instructions for Model HV2105 Attaching AIR Hose and Fluid Hose Setting POT Pressure and Priming Spray GUNCleaning Your Spray GUN MaintenanceCleaning the System Turbine MaintenanceHvlp Paint Sprayers Symptom Possible Causes Corrective Action Troubleshooting ChartParts Not Pictured Turbine Repair PartsSpray Gun with Quick Release Cup Ref. No Description Part Number Qty Parts List for Spray Gun with Quick Release CupCart Assembly For Model HV2105 only Parts List for Cart Assembly, For Model No. HV2105 Only Fluid Tank Assembly For Model HV2105 only HV2100, HV2105 Limited Warranty

HV2100, HV2105 specifications

The Campbell Hausfeld HV2105 and HV2100 models represent a significant advancement in airless paint sprayer technology. These units are engineered for homeowners and DIY enthusiasts seeking efficient, high-quality painting solutions. Both models deliver a user-friendly experience while ensuring professional results, making them ideal for various painting projects around the home.

The HV2105 and HV2100 feature a powerful motor that enables consistent paint flow, ensuring uniform coverage on surfaces. The HV2105 is specially designed for small to medium-sized projects, such as fences, furniture, or accent walls, while the HV2100 is suitable for larger applications, including exterior walls and large indoor spaces. The adjustable pressure settings allow users to customize the paint flow, catering to different project requirements and types of coatings.

One of the standout features of these models is their advanced technology, which eliminates the need for thinning paint. This not only saves time but also ensures that users can achieve a smooth finish without the hassle of preparing the paint. Additionally, the airless design provides fast operation, allowing users to complete their projects more quickly than traditional painting methods.

Another key characteristic of the HV2105 and HV2100 is their lightweight and portable construction. These sprayers weigh significantly less than many conventional models, making them easy to maneuver and transport from one location to another. This is particularly beneficial for projects that require mobility or for users who may need to work on scaffolding or ladders.

The ergonomic design of the spray gun enhances comfort during use, reducing fatigue and strain on the user’s hands and arms. Furthermore, both models come equipped with an easy-clean system that simplifies maintenance after use, ensuring longevity and optimal performance over time.

In summary, the Campbell Hausfeld HV2105 and HV2100 airless paint sprayers are excellent choices for anyone looking to achieve a professional finish with ease. Their powerful motor, adjustable settings, lightweight design, and user-friendly features combine to make painting projects more efficient and enjoyable. Whether tackling small touch-ups or larger painting jobs, these sprayers stand out in the competitive market, delivering reliability and quality that users can trust.
Top Page Image Contents