c.Disconnect the Power Cord (34) from the power source before mak- ing any adjustments, changing ac- cessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to oper- ate the power tool. Power tools are dangerous in the hands of untrained users.
e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If dam- aged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f.Keep the power tool clean. Improp- er cleaning of the Paint Sprayer and its accessories is a common reason for the Spray Gun to jam or not per- form properly.
g.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations differ- ent from those intended could result in a hazardous situation.
5.Service
a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Specific Safety
Warnings
1.Maintain labels and nameplates on the Paint Sprayer. These carry important safety information. If un- readable or missing, contact Harbor
Freight Tools for a replacement.
2.Avoid unintentional starting. Pre- pare to begin work before turning on the Paint Sprayer.
3.For your safety, maintenance should be performed regularly by a qualified service technician. The
Paint Sprayer and its accessories must be thoroughly cleaned after every use.
4.Do not spray near open flames, pilot lights, stoves, heaters, or any other heat source. Most solvents and coatings are highly flammable, particularly when sprayed. Do not smoke while spraying.
5.Read all of the information con- cerning coating products and cleaning solvents. Chlorinated sol- vents (i.e., trichlorethylene and meth- ylene chloride) can chemically react with aluminum and may explode. Many Paint Sprayers contain alumi- num. If you have any doubt about potential chemical reactions contact the solvent or coating manufacturer.
6.Materials used when painting or cleaning may be harmful or fatal if inhaled or swallowed. Only use in an area with adequate ventilation. Use a
SKU 97750 | For technical questions, please call | Page 4 |