Grizzly instruction manual Set Up, InventoryAssembly, Model H6331 Inventory Figure

SECTION 3: SET UP

InventoryAssembly

Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materi- als for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

After you have unpacked the carton you should find the following:

Model H6331 Inventory (Figure 1)		Qty
A.	Small Spray Gun	1
B.	Storage Case	1
C.	Large Spray Gun	1
D.	1⁄4" NPT Quick Disconnect Fittings	2
E.	1⁄4" NPT Push-On Hose Fitting	1

1.Attach the air hose to the spray gun with the included male 1⁄4" NPT quick connect fitting.

Note: You have the option of attach- ing a regulator/gauge directly to the gun for convenient air pressure control at the gun.

2.Attach the spray gun to an air supply regulated between 43–58 PSI.

Note: For the best results, use a hose that will be dedicated for spray use only. Do not use a hose that has been used with an in-line oiler as the oil can contaminate the paint being sprayed or clog an in-line filter.

A

B

D

C

E

Figure 1. Model H6331 inventory.

-8- Model H6331 HVHP Spray Gun Set