Grizzly G9986 instruction manual Identification, Power Switch Turns motor ON/OFF

Identification

Refer to the list below and Figures 1 & 2 to become familiar with the drill press controls.

1.Power Switch: Turns motor ON/OFF.

2.Belt Tension Lock: Locks motor in place.

3.Table Height Lock: Locks/unlocks to adjust table height.

4.Lash Screw: Adjusts quill lash.

5.Downfeed Handles: Used to move the spindle down during operation.

6.Torsion Spring: Returns quill into head- stock.

7.Depth Stop: Limits quill travel to a pre-set drilling depth.

8.Scale: Displays current table-tilt angle.

1 2

4	3
	5

6	7
	8

Figure 2. Left-side controls.

Refer to the list below to become familiar with the drill press terms and definitions.

Headstock: The cast iron upper portion of the drill press that houses the quill and supports the motor and belt housing.

Arbor: A tapered shaft that connects the chuck to the spindle.

Quill: Houses the spindle and bearings. Spindle: The hollow shaft that accepts the arbor.

Figure 1. Right-side controls.

-4- Model G9986 8" Drill Press