Grizzly H8203 owner manual Setup Safety, Unpacking, Inventory, Box 1 Figure Qty

SECTION 3: SETUP

Setup Safety

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Unpacking

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

H8203 Professional Drill Sharpening Machine

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Box 1: (Figure 6)		Qty
A.	Collets	11
	— 2.0-3.0mm (1⁄8") Collet	1
	— 3.1-4.0mm (5⁄32") Collet	1
	— 4.1-5mm (3⁄16") Collet	1
	— 5.1-6mm (1⁄4") Collet	1
	— 6.1-7mm (9⁄32") Collet	1
	— 7.1-8mm (5⁄16") Collet	1
	— 8.1-9mm (3⁄8") Collet	1
	— 9.1-10mm (25⁄64") Collet	1
	— 10.1-11mm (7⁄16") Collet	1
	— 11.1-12mm (15⁄32") Collet	1
	— 12.1-13mm (1⁄2") Collet	1
B.	Collet Holder	1
C.	Hex Wrench 4mm	1
D.	Lock Ring	1
	A

B

D

C

Figure 6. H8203 inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

-11-