Palm Hammer Safety
In addition to the rules stated in the previ- ous section, and those in the warning boxes throughout this manual, please observe the following safety tips for your pneumatic palm hammer:
1.READ THIS ENTIRE MANUAL BEFORE OPERATING THE PALM HAMMER.
2.ALWAYS DISCONNECT AIR FROM THE PALM HAMMER whenever changing tools or it may actuate acci- dentally and cause personal injury.
3.DO NOT SUPPORT WORKPIECE NEAR NAIL POINT OF ENTRY. Nail can deflect and be driven through the surface of the workpiece, puncturing your hand or fingers.
4.NEVER CONNECT THE PALM HAMMER TO PRESSURIZED OXY- GEN OR OTHER COMBUSTIBLE GASES as a power source. Only use filtered, lubricated, and regulated compressed air.
5.ALWAYS KEEP ANY BYSTANDERS BEHIND PALM HAMMER OR AWAY FROM AREA DURING USE. Palm hammer may hit a nail at an awkward angle, which could cause it to become a dangerous projectile.
6.DO NOT CARRY THE PALM HAM- MER BY THE AIR HOSE.
7.DO NOT ACTUATE THE PALM HAMMER ON ANY PART OF YOUR BODY or on any bystanders. The hammering action can quickly cause an injury.
Operating this palm hammer can pro- pel objects into the air, causing immediate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles.
To protect your hearing, always wear ANSI approved ear protection when operating this palm hammer.
Always disconnect air from palm air hammer whenever cleaning! If con- nected to air, hammer may actuate accidentally, causing serious person- al injury!
H3142 Pneumatic Palm Hammer Kit |