Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Operating Instructions

 

Care and Cleaning

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

HOW TO CONNECT ELECTRICITY

Tips

Consumer Support

Troubleshooting

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip

or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Page 2
Image 2
GE AEQ05 Safety Instructions, Tips Consumer Support, Do not use an adapter plug with this appliance
Page 1 Page 3

AEQ05 specifications

The GE AEQ05 is a cutting-edge industrial automation controller designed by General Electric, tailored for various manufacturing and process control applications. The AEQ05 is a part of GE’s comprehensive suite of control systems, specifically engineered to enhance operational efficiency, streamline workflows, and improve overall productivity in industrial environments.

One of the standout features of the GE AEQ05 is its robust modular design. This flexibility allows users to customize the controller to meet specific application needs, enabling the addition or removal of modules to cater to varying operational demands. The AEQ05 supports a wide range of I/O modules, including digital, analog, and specialty modules, enhancing its versatility across diverse industrial settings.

The AEQ05 is equipped with advanced communication capabilities, supporting numerous industrial communication protocols such as Ethernet/IP, Modbus TCP, and Profibus. This compatibility is essential for integrating with existing systems and facilitating seamless communication between devices. The controller’s architecture promotes interoperability, making it easier for organizations to implement the AEQ05 into their existing infrastructure without significant alterations.

In terms of processing power, the AEQ05 offers high-performance processing capabilities, ensuring real-time data acquisition and processing. This is crucial for monitoring and controlling manufacturing processes where timing and precision are vital. The controller also features extensive data logging and alarm management functionalities, which helps organizations maintain compliance with industry regulations and improve overall safety.

A key characteristic of the GE AEQ05 is its user-friendly interface. The controller can be easily programmed using GE’s advanced software tools, which provide an intuitive development environment for configuring applications and monitoring system performance. Additionally, the device can be accessed remotely, allowing for real-time diagnostics and troubleshooting, which significantly reduces downtime and enhances operational efficiency.

Another notable technology included in the AEQ05 is its support for advanced analytics and machine learning algorithms. These features enable predictive maintenance, which helps organizations anticipate equipment failures and schedule maintenance proactively, minimizing disruptions. Overall, the GE AEQ05 stands out as a powerful solution for modern industrial automation, combining modularity, advanced communication, high processing power, and user-friendly features to meet the evolving demands of the manufacturing sector.
Top Page Image Contents