Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: ge.com In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Approximately 1 hour

•We recommend that two people install this product.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

•You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt AC, 60 Hz grounded outlet protected with a

15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt AC, protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

TOOLS YOU WILL NEED

Phillips head screwdriver

Flat-blade screwdriver

Pencil

Ruler or tape measure

Level

Scissors or knife

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

8

Page 7 Page 9
Page 8
Image 8
GE AEQ05 installation instructions Before YOU Begin, Electrical Requirements, Tools YOU will Need
Page 7 Page 9

AEQ05 specifications

The GE AEQ05 is a cutting-edge industrial automation controller designed by General Electric, tailored for various manufacturing and process control applications. The AEQ05 is a part of GE’s comprehensive suite of control systems, specifically engineered to enhance operational efficiency, streamline workflows, and improve overall productivity in industrial environments.

One of the standout features of the GE AEQ05 is its robust modular design. This flexibility allows users to customize the controller to meet specific application needs, enabling the addition or removal of modules to cater to varying operational demands. The AEQ05 supports a wide range of I/O modules, including digital, analog, and specialty modules, enhancing its versatility across diverse industrial settings.

The AEQ05 is equipped with advanced communication capabilities, supporting numerous industrial communication protocols such as Ethernet/IP, Modbus TCP, and Profibus. This compatibility is essential for integrating with existing systems and facilitating seamless communication between devices. The controller’s architecture promotes interoperability, making it easier for organizations to implement the AEQ05 into their existing infrastructure without significant alterations.

In terms of processing power, the AEQ05 offers high-performance processing capabilities, ensuring real-time data acquisition and processing. This is crucial for monitoring and controlling manufacturing processes where timing and precision are vital. The controller also features extensive data logging and alarm management functionalities, which helps organizations maintain compliance with industry regulations and improve overall safety.

A key characteristic of the GE AEQ05 is its user-friendly interface. The controller can be easily programmed using GE’s advanced software tools, which provide an intuitive development environment for configuring applications and monitoring system performance. Additionally, the device can be accessed remotely, allowing for real-time diagnostics and troubleshooting, which significantly reduces downtime and enhances operational efficiency.

Another notable technology included in the AEQ05 is its support for advanced analytics and machine learning algorithms. These features enable predictive maintenance, which helps organizations anticipate equipment failures and schedule maintenance proactively, minimizing disruptions. Overall, the GE AEQ05 stands out as a powerful solution for modern industrial automation, combining modularity, advanced communication, high processing power, and user-friendly features to meet the evolving demands of the manufacturing sector.
Top Page Image Contents