Caution! Do not expose to rain or use in damp locations.
Warning! For your own safety read instruction manual before operating drill press. Wear eye protection, do not wear gloves, necktie or loose clothing, clamp workpiece or brace against column to prevent rotation, use recommended speed for drill accessory and workpiece material.
Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Required tools
The following tools are required to assemble the drill press
•3mm, 4mm, 6mm Hex Keys (Supplied)
•16mm Wrench (Not Supplied)
•Phillips Head Screwdriver (Not Supplied)
Assembly time
The LDP13F drill press will take approximately 20 minutes to assemble.
7