Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions

Work area

•Keep work area clean and well lit. Cluttered and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal safety

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

•Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

•Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

•Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

GTX18250, GTX24250 specifications

Global Machinery Company has established its reputation in the industrial machinery sector with the introduction of its advanced models, the GTX18250 and the GTX24250. These machines represent the pinnacle of engineering and innovation, tailored to meet the diverse needs of today’s manufacturing landscape.

The GTX18250 is designed to provide exceptional performance for medium to large-scale operations. It is powered by a high-efficiency, low-emission engine that ensures optimal fuel consumption while reducing environmental impact. The machine boasts a robust construction, featuring high-strength materials that enhance durability and withstand the rigors of continuous use. Key features include a precision hydraulic system that enables smooth operation and improved control, which is critical for tasks that require fine detailing.

On the other hand, the GTX24250 offers enhanced capabilities suitable for larger industrial applications. Its engine is designed for high output, allowing it to tackle heavy-duty work with ease. The GTX24250 incorporates state-of-the-art technology, including an intelligent monitoring system that provides real-time data on performance metrics. This feature helps operators optimize operations and ensures timely maintenance, which ultimately extends the machine's lifespan.

Both models are equipped with advanced safety mechanisms, such as automatic shutdown systems and reinforced guarding, ensuring operator safety in various environments. Additionally, they include user-friendly interfaces with touchscreen controls, simplifying the operation process for all skill levels.

A hallmark of both the GTX18250 and GTX24250 is their modular design, allowing for easy upgrades and part replacements. This flexibility means that companies can adapt their machinery to evolving needs without significant additional investment. Furthermore, the machines have options for various attachments, increasing their versatility in handling different tasks.

In conclusion, the GTX18250 and GTX24250 by Global Machinery Company exemplify the perfect blend of power, efficiency, and innovation. With their advanced features, cutting-edge technology, and commitment to safety and durability, these models are poised to set new standards in the industrial machinery market, empowering businesses to achieve their operational goals effectively.