Side Sliding Door Window Guard F2-10 | Havis-Shields F3, WGI-F1, F4

SIDE SLIDING DOOR WINDOW GUARD (F2-10):

1.A 14” long aluminum angle bracket is provided to attach to the rear vertical section of the window frame.

2.This is necessary in order to screw on the rear vertical section of window guard.

3.Using four (4) #10 x ½” Sheet metal screws, attach angle bracket to frame through existing bracket holes.

•The side of the bracket without holes should be flush with the inside of the window frame.

•The window guard can now be installed as stated in section #4. See section 8 – door window guard does not have cutouts for window latches (making them inoperable).

FIXED BODY WINDOW GUARD:

1.While holding the cage in place, drill 1/8” pilot holes for mounting screws.

2.Install using #10 x ½” sheet metal screws provided.

NOTE 1: Be careful not to drill into glass. (Use drill stop)

NOTE 2: To avoid stripping of holes, do not over tighten.

NOTE 3: Some of the trim mounting spring clips may need to be removed to allow screens to meet the window frame easily.

PLASTIC WINDOW TRIM INSTALLATION:

1.Plastic Trim Spacing:

•Plastic trim must be spaced out ½” to accommodate window guard.

•Remove the top screws from the lower trim panels.

(These panels should still be in the van).

•Pull out the lower panel just enough to insert the ½” nylon Spacers provided with the kit.

•Screw the top of the lower trim panels back on with #10 x 1 ¼” sheet metal screws also provided with the kit.

2.Metal Spring Clip Spacing:

•(See diagram 1 on page 4) There are metal spring clips that hold the upper trim in place. These clips must also be spaced out using the following method.

•Using a 9MM socket, remove the spring clip and nut.

•Immediately reinstall the nuts only.

•Put two #10 washers onto the same bolt on top of the nut.

•Put spring clips on top of the washers.

NOTE: More washers can be used if needed. Make sure to leave sufficient threads for metric nut.

•Using a 7MM socket, put the M4 x 7MM nut (supplied in this kit) on the stud to the hold spring clip and washers. Proceed to the next spring clip.

•When all the spring clips are reinstalled, the interior trim can then be reinstalled. Everything should fit neatly.

WGI-F1-F2-F3-F4_INST_7-08

F3, F4, WGI-F1, F2 specifications

Havis-Shields is known for its innovative solutions in the field of rugged and reliable mobile technology. Among its various offerings, the Havis-Shields F2, WGI-F1, F4, and F3 stand out for their unique features, technologies, and characteristics tailored to meet the demands of mobile work environments.

The Havis-Shields F2 is a versatile docking station designed primarily for laptops and tablets. Its robust design ensures that devices remain secure during transport, while also providing easy access to necessary ports and connections. The F2 incorporates advanced locking mechanisms that keep devices firmly in place, even in rough conditions. Its quick-release feature allows for convenient removal of laptops, promoting both efficiency and safety in mobile operations.

The WGI-F1 is geared towards the next generation of mobile computing with integrated wireless capabilities. This docking station supports 4G LTE connectivity, enabling real-time data access and communication. The WGI-F1 also includes a built-in power distribution system that manages power for multiple devices simultaneously, ensuring that all equipment remains operational without excessive drain on the vehicle's electrical system.

The Havis-Shields F4 is engineered for the most demanding environments, featuring a form factor specifically designed for law enforcement and public safety professionals. The F4’s rugged chassis protects against harsh conditions and accidental drops, while providing ample ventilation to prevent overheating. It is equipped with customizable mounting options and expanded input/output ports to accommodate a wide variety of devices, enhancing functionality and adaptability in emergency situations.

Lastly, the F3 model represents a balance of portability and durability, focusing on streamlined designs without compromising on quality. The lightweight construction of the F3 allows for easy transport, making it ideal for fieldwork. Despite its compact size, it incorporates essential protective features and compatibility with various mounting solutions.

In conclusion, Havis-Shields provides an array of docking solutions with the F2, WGI-F1, F4, and F3, each tailored for specific applications and environments. By integrating cutting-edge technology, scalable features, and rugged designs, these products enable seamless mobile operations across different industries, ensuring that professionals can remain connected and productive no matter where their work takes them.