Havis-Shields installation instructions Installation Instructions WGI-F1, F2, F3, F4

Page 1

INSTALLATION INSTRUCTIONS WGI-F1, F2, F3, F4

INTERIOR WINDOW GUARDS

FOR 1994 – 2008 FORD WINDOW VANS

TOOLS REQUIRED:

 

 

Power Drill

Ratcheting Wrench

1/8” Drill Bit

T-50 Torx Bit (for seat belts)

Phillips Screw Driver

Plastic Cutting Tool (utility knife or tin snips)

Metric Socket set

 

 

HARDWARE:

 

 

QTY

DESCRIPTION

 

PART#

115

#10 x ½” Sheet metal screws

 

GSM34185

30

#10 X 1 ¼” Sheet metal screws

 

GSM33197

24

#10 Flat Washer

 

GSM31003

15

M4 x 7mm Hex nuts

 

GSM30200

24

½” Nylon spacers

 

GSM20095

2

Window Latch cover plate

 

WGI-F1-COVER PLATE

2

T-25 Torx ¼” Hex Insert OAL Tamperproof Bit

SM10260

SUBASSEMBLY:

1.Remove seats and seat belts for better access to the windows.

2.Remove plastic trim surrounding the fixed body windows. Save the plastic trim for reinstallation.

3.Determine which guard goes to each window. NOTE: The perforated diamond shaped holes has one side that is smoother than the other. The smoother side goes towards the inside, facing the passenger.

DOOR WINDOW GUARDS:

1.In order for guard to fit properly on frame, you must permanently remove the upper plastic trim on doors. The top of the lower door panel may have to be trimmed approximately ¼” to ½”. (Note: Place guard on window frame to determine possible trimming). See section 8 – door window guard does not have cutouts for window latches (making them inoperable).

2.With the doors open, hold the window screen up to the window/door frame. The guard framework should fit evenly around the window frame.

3.Mark a few holes at the top of the door frame using the predrilled holes on the screen framework as a guide. Do not mark holes for the sides or bottom yet.

4.Put on Safety goggles.

5.Remove window guards and drill holes as marked with a 1/8” drill bit.

6.Attach window screens by using #10 x ½” sheet metal screws. Now locate and mark the balance of holes, drill and attach, starting at the top and work your way down.

7.If vehicle has plastic upper door trim, do not reinstall.

WGI-F1-F2-F3-F4_INST_7-08

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Installation Instructions WGI-F1, F2, F3, F4 Side Sliding Door Window Guard F2-10 Plastic Window Trim InstallationFixed Body Window Guard Window Latch cover plate Trim cut headliner if desired Ford Vans WGI-F1-F2-F3-F4INST7-08

F3, F4, WGI-F1, F2 specifications

Havis-Shields is known for its innovative solutions in the field of rugged and reliable mobile technology. Among its various offerings, the Havis-Shields F2, WGI-F1, F4, and F3 stand out for their unique features, technologies, and characteristics tailored to meet the demands of mobile work environments.

The Havis-Shields F2 is a versatile docking station designed primarily for laptops and tablets. Its robust design ensures that devices remain secure during transport, while also providing easy access to necessary ports and connections. The F2 incorporates advanced locking mechanisms that keep devices firmly in place, even in rough conditions. Its quick-release feature allows for convenient removal of laptops, promoting both efficiency and safety in mobile operations.

The WGI-F1 is geared towards the next generation of mobile computing with integrated wireless capabilities. This docking station supports 4G LTE connectivity, enabling real-time data access and communication. The WGI-F1 also includes a built-in power distribution system that manages power for multiple devices simultaneously, ensuring that all equipment remains operational without excessive drain on the vehicle's electrical system.

The Havis-Shields F4 is engineered for the most demanding environments, featuring a form factor specifically designed for law enforcement and public safety professionals. The F4’s rugged chassis protects against harsh conditions and accidental drops, while providing ample ventilation to prevent overheating. It is equipped with customizable mounting options and expanded input/output ports to accommodate a wide variety of devices, enhancing functionality and adaptability in emergency situations.

Lastly, the F3 model represents a balance of portability and durability, focusing on streamlined designs without compromising on quality. The lightweight construction of the F3 allows for easy transport, making it ideal for fieldwork. Despite its compact size, it incorporates essential protective features and compatibility with various mounting solutions.

In conclusion, Havis-Shields provides an array of docking solutions with the F2, WGI-F1, F4, and F3, each tailored for specific applications and environments. By integrating cutting-edge technology, scalable features, and rugged designs, these products enable seamless mobile operations across different industries, ensuring that professionals can remain connected and productive no matter where their work takes them.
Top Page Image Contents