22.NEVER LEAVE THE TOOL RUNNING UNATTENDED - TURN POWER OFF. Do not leave the tool until it comes to a full stop.
23.DRUGS, ALCOHOL, MEDICATION. Do not operate the tool under the influence of drugs, alco- hol, or any medication. Never operate machinery when overly fatigued.
IV. UNPACKING
The Model G1126 comes from the factory in a wooden crate. While it is still on its pallet, use a fork- lift (if available) to move the machine to its permanent location. Once in place, carefully remove the crate surrounding the Model G1126 with a hammer or crowbar. Lift the Model G1126 with a sling wrapped around the milling head to lift the machine off the pallet and onto your bench. Make sure you tighten all the locks that restrict moving parts to avoid sudden shifts which could unbalance the machine.
REMEMBER: Always wear
If you find the machine is damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all pack- ing materials for inspection by the carrier or their agent. Without the packing materials, filing a freight claim can be difficult. If you need advice regarding this situation, please call us.
Caution: The mill / drill weighs a hefty 660 pounds in its packaging. DO NOT attempt to move this machine without proper lifting equipment.
V. PIECE INVENTORY
Take a quick inventory of the parts and put them aside for assembly later.
Since the majority of the Model G1126 is
•Mill / Drill Unit
•Power Feed
•Fly Cutter
•Handwheels
•Adjustment Wrench
•Flycutter
•Drill Chuck Arbor
•Quill Feed Rods (3 pcs.)
•1/2" Drill Chuck and Key
- 4 -