Grizzly G3183 instruction manual Operations, Safety Rules

Page 17

SECTION 4: OPERATIONS

Safety Rules

Earlier in this manual we covered general shop and machine safety rules. This section will address safety rules specific to your mortiser.

Be sure to observe all electrical requirements such as fuse sizing, wire sizing, machine grounding and any other electrical considera- tion.

Always wear eye protection while operating this mortiser. Also use a respirator to avoid breathing dust. All safety equipment must be ANSI approved.

Always be aware of the condition of the wood you are mortising. Pay particular attention to knots, splits, and other potentially dangerous areas.

Never attempt to operate the mortiser with bits or chisels that are dull or damaged. They will burn the wood and cause it to bind.

Maintain the mortiser in proper working condi- tion. Perform machine inspections and main- tenance services promptly when called for.

Always put adjustment tools away after use.

Before machine inspection, maintenance or changing accessories: Turn off switch, unplug power cord and wait for all moving parts to stop.

Keep hands away from the chisel and bit while this tool is being operated.

Always have the chisel opening facing away from the operator or the fence.

The bit should reach full speed before begin- ning a cut.

Always feed chisel evenly and smoothly.

Do not touch the chisel during the mortising operation.

Never leave the mortiser running unattended.

This sums up our review of safety guidelines. Remember that every shop has its own specific hazards. Be sure, above all else, to use good common sense and reasonable caution each time you start this Hollow Chisel Mortiser, or any woodworking machinery. Proper safety stan- dards rarely take any more time or energy when followed religiously. Develop a habit of safety.

Caution

Always wear ANSI-approved safety glasses or goggles when operating equipment. Do not allow visitors into your workshop when testing or oper- ating equipment.

G3183 Hollow Chisel Mortiser

-15-

Image 17
Contents Hollow Chisel Mortiser Page Table Of Contents Introduction Safety Rules For All Tools Unpacking Piece Inventory Clean up Site Considerations Tools Required Hydraulic Cylinder AssemblyTableFence Hold Down Chisel Installation Page Chuck Extender HeadstockFence AdjustmentsHold Down Depth Stop Head Adjustment Operations Safety RulesTest Run Mortising 2 5 4 GeneralLubrication MaintenanceClosure 114 113 139 G3183 Hollow Chisel Mortiser Casting Base Machine Data Troubleshooting Guide Warranty and Returns

G3183 specifications

The Grizzly G3183 is a versatile woodworking tool designed for both hobbyists and professional woodworkers. This heavy-duty spindle sander is renowned for its outstanding performance and precision, making it a valuable addition to any workshop.

One of the main features of the Grizzly G3183 is its powerful 1 HP motor, which allows for consistent and reliable sanding action. This robust motor can handle a variety of materials, including hardwoods and softwoods, making it suitable for a wide range of woodworking projects. The motor runs at a speed of 1725 RPM, providing ample torque for effective sanding.

The G3183 is designed with a 12-inch diameter cast-iron table that can be tilted up to 45 degrees. This tilting feature is essential for creating accurate bevels and angles, enhancing the versatility of the sander. The table also boasts a pair of integrated miter slots for additional stability and support when using jigs.

Another remarkable aspect of the Grizzly G3183 is its spindle size. It comes with an impressive array of sanding sleeves that range from 1/2 inch to 3 inches in diameter, allowing users to tackle both intricate and broad surfaces. This capability empowers woodworkers to produce smooth finishes on various profiles and curves.

Safety is paramount in woodworking, and the G3183 doesn’t compromise in this regard. The sander is equipped with a built-in dust port that connects to a dust collection system, ensuring a cleaner working environment by effectively removing sanding debris. Additionally, the rubberized feet provide stability and minimize vibration during operation, which ensures both safety and precision.

In terms of build quality, the Grizzly G3183 features a sturdy construction that limits flexing during use, providing enhanced accuracy. The machine is aesthetically designed to blend well in any workshop setting, with a lightweight build that allows for portability without sacrificing performance.

Overall, the Grizzly G3183 is a powerful, efficient, and user-friendly spindle sander. With its array of features and thoughtful engineering, it caters to woodworkers at all levels, providing the tools necessary to achieve professional-quality results in every project. Whether for fine detail work or larger projects, this spindle sander stands out as a reliable choice in the woodworking community.