Grizzly G3183 instruction manual Clean up Site Considerations

Page 7

Clean up

 

Site Considerations

 

 

 

 

 

 

The column and other unpainted parts of the Model G3183 are coated with a waxy oil that pro- tects them from corrosion during shipment. Remove the protective coating with mineral spir- its and paper towels. Do not use gasoline or other petroleum based solvents because of their extremely low flash points. Do not use chlorine- based solvents – if you happen to splash some onto a painted surface, you’ll ruin the finish.

WARNING!

Follow the safety rules listed below when working with solvents:

1.Read and follow all directions and warnings on the solvent label.

2.Work only in a well ventilated area.

3.Do not work near any type of open flame (e.g., pilot lights, kerosene heaters, and so on).

4.DO NOT smoke while working with flamma- ble material.

5.Paper towels from the cleaning process are extremely combustible. Dispose of waste towels so they do not create a fire hazard.

1.Mounting: We recommend mounting your Hollow Chisel Mortiser to a bench. This will prevent the machine from tipping over and to allow for maximum leverage when mortising.

2.Working Clearances: Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a loca- tion for your Hollow Chisel Mortiser.

3.Lighting and Outlets: Lighting should be bright enough to eliminate shadow and pre- vent eye strain. Electrical circuits should be dedicated or large enough to handle amper- age requirements. Outlets should be located near each machine so power or extension cords are clear of high-traffic areas. Observe local electrical codes for proper installation of new lighting, outlets, or circuits.

 

 

 

 

 

 

 

 

 

 

 

 

G3183 Hollow Chisel Mortiser

-5-

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hollow Chisel Mortiser Page Table Of Contents Introduction Safety Rules For All Tools Unpacking Piece Inventory Clean up Site Considerations Tools Required Hydraulic Cylinder AssemblyTableFence Hold Down Chisel Installation Page Chuck Extender HeadstockFence AdjustmentsHold Down Depth Stop Head Adjustment Operations Safety RulesTest Run Mortising 2 5 4 GeneralLubrication MaintenanceClosure 114 113 139 G3183 Hollow Chisel Mortiser Casting Base Machine Data Troubleshooting Guide Warranty and Returns

G3183 specifications

The Grizzly G3183 is a versatile woodworking tool designed for both hobbyists and professional woodworkers. This heavy-duty spindle sander is renowned for its outstanding performance and precision, making it a valuable addition to any workshop.

One of the main features of the Grizzly G3183 is its powerful 1 HP motor, which allows for consistent and reliable sanding action. This robust motor can handle a variety of materials, including hardwoods and softwoods, making it suitable for a wide range of woodworking projects. The motor runs at a speed of 1725 RPM, providing ample torque for effective sanding.

The G3183 is designed with a 12-inch diameter cast-iron table that can be tilted up to 45 degrees. This tilting feature is essential for creating accurate bevels and angles, enhancing the versatility of the sander. The table also boasts a pair of integrated miter slots for additional stability and support when using jigs.

Another remarkable aspect of the Grizzly G3183 is its spindle size. It comes with an impressive array of sanding sleeves that range from 1/2 inch to 3 inches in diameter, allowing users to tackle both intricate and broad surfaces. This capability empowers woodworkers to produce smooth finishes on various profiles and curves.

Safety is paramount in woodworking, and the G3183 doesn’t compromise in this regard. The sander is equipped with a built-in dust port that connects to a dust collection system, ensuring a cleaner working environment by effectively removing sanding debris. Additionally, the rubberized feet provide stability and minimize vibration during operation, which ensures both safety and precision.

In terms of build quality, the Grizzly G3183 features a sturdy construction that limits flexing during use, providing enhanced accuracy. The machine is aesthetically designed to blend well in any workshop setting, with a lightweight build that allows for portability without sacrificing performance.

Overall, the Grizzly G3183 is a powerful, efficient, and user-friendly spindle sander. With its array of features and thoughtful engineering, it caters to woodworkers at all levels, providing the tools necessary to achieve professional-quality results in every project. Whether for fine detail work or larger projects, this spindle sander stands out as a reliable choice in the woodworking community.
Top Page Image Contents