Harbor Freight Tools 94944 operating instructions Assembly Instructions

Page 10

ASSEMBLY INSTRUCTIONS

Note: Turn to pages 16-18 to assist you in identifying the parts mentioned in the assembly, operating instructions and troubleshooting sections of this manual.

The Rotary Hammer comes fully assembled. There is a Side Handle (74) that must be attached as needed. There are two places on the Rotary Hammer that will accept the Side Handle (74) shown below. To attach the Side Handle (74), thread it into the housing by twisting it in a clockwise rotation until it stops turning.

Side Handle (74)

SKU 94944

PAGE 10

Image 10

Contents Rotary Hammer Save this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyTool USE and Care Grounding ServiceGrounded Tools Tools with Three Prong Plugs Figure a Double Insulated Tools Tools with TWO Prong Plugs See Figure C Extension Cords See Figure C, and Figure D Specific Safety Rules SymbologyIndustrial applications must follow Osha requirements Vibration Hazard UnpackingAssembly Instructions How to turn on the Rotary Hammer How to attach the chiselsOperating Instructions Important Read before use Chipping in a straight lineHow to adjust the Masonry Drill 118 speed Using the Rotary Hammer as a hammer drillBreaking up concrete INSPECTION, MAINTENANCE, and Cleaning How to add grease to the gears TroubleshootingProblem Cause Action Parts List Part Description QtySpeed Control Knob Assembly Diagram SKU