Harbor Freight Tools 94944 Operating Instructions, How to attach the chisels

Page 11

How to attach the chisels

WARNING: Always make sure this tool is not plugged in before changing the bits.

1.Slide the Bits into the Rotary Hammer with the flat cut-out side facing the Rod (19) as shown in Figure 2.

2.Pull out the Rod (19) while you insert the Bit. See Figure 1. The two bits both have a flat space on the shaft that must be turned horizontally when it is inserted. See Figure 2. Turn the Rod (19) clockwise 180° to lock the Bit into place. The Bit should move in and out after it is locked but should not come out.

Rod (19)

Flat area of Bit

Figure 1

Figure 2

OPERATING INSTRUCTIONS

How to turn on the Rotary Hammer

1.To turn on the Rotary Hammer squeeze the Switch (107) shown below in Figure

3.There is a latch on the upper part of the switch that locks the switch on.

Switch (107)

Figure 3

SKU 94944

PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Rotary Hammer Work Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care Grounded Tools Tools with Three Prong Plugs ServiceGrounding Figure a Double Insulated Tools Tools with TWO Prong Plugs See Figure C, and Figure D Extension CordsSee Figure C Industrial applications must follow Osha requirements SymbologySpecific Safety Rules Unpacking Vibration HazardAssembly Instructions Operating Instructions How to attach the chiselsHow to turn on the Rotary Hammer Chipping in a straight line Important Read before useBreaking up concrete Using the Rotary Hammer as a hammer drillHow to adjust the Masonry Drill 118 speed INSPECTION, MAINTENANCE, and Cleaning Problem Cause Action TroubleshootingHow to add grease to the gears Part Description Qty Parts ListSpeed Control Knob Assembly Diagram SKU
Top Page Image Contents