Harbor Freight Tools 93142 operating instructions Cordless Drill with Driver Volt

Page 1

3/8” CORDLESS DRILL with DRIVER

19.2 VOLT

Model 93142

OPERATING INSTRUCTIONS

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

REV 05/05

Image 1
Contents Cordless Drill with Driver Volt For technical questions or replacement parts, please callGeneral Safety Rules Product SpecificationsUnpacking Save this ManualPersonal Safety Electrical SafetyService Specific Safety RulesTool USE and Care SKU For technical questions, please callPage Product Features See Figure a Figure aOperating Instructions To Charge the Cordless DrillSee Figure B See Figure C Observe the top of the Cordless Drill. See Figure CTOP View Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListAssembly Diagram