Harbor Freight Tools 93142 operating instructions

Page 5

2.Maintain labels and nameplates on this product. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.When using the Cordless Drill, always maintain a firm grip on the tool with both hands.

4.Hold the tool by its insulated gripping surfaces when performing an operation where the Cordless Drill may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the Cordless Drill “live” and shock the operator.

This is just an additional precaution; always check for hidden wiring before drilling.

5.Do not use the Cordless Drill or Charger (21) if it has been dropped, damaged, left outdoors, or immersed in liquid.

6.To avoid electrical shock, do not handle the Charger (21), its Power Cord Plug, or the Cordless Drill with wet hands.

7.Keep the Handle of the Cordless Drill dry, clean, and free from oil and grease.

8.Always turn off the Cordless Drill and unplug the Charger (21) from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures.

9.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Cordless Drill.

10.To avoid electrical shock, do not pull or carry the Charger (21) by its Power Cord.

11.Never leave the Charger (21) unattended when it is plugged into an electrical outlet. Make sure to unplug it from its electrical outlet before leaving.

12.Proper Battery Pack Care: Battery Pack (15) leakage may occur under extreme usage or temperature conditions. If Battery Pack fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes into contact with the eyes, flush with water for several minutes and contact a doctor immediately. Never burn the Battery Pack, as it can explode in a fire. Do not charge the Cordless Drill with a leaking Battery Pack. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery Pack.

13.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

SKU 93142

For technical questions, please call 1-800-444-3353

PAGE 5

Image 5
Contents Cordless Drill with Driver Volt For technical questions or replacement parts, please callGeneral Safety Rules Product SpecificationsUnpacking Save this ManualPersonal Safety Electrical SafetyService Specific Safety RulesTool USE and Care SKU For technical questions, please callPage Product Features See Figure a Figure aSee Figure B To Charge the Cordless DrillOperating Instructions TOP View Observe the top of the Cordless Drill. See Figure CSee Figure C Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListAssembly Diagram