Harbor Freight Tools 90120 operating instructions Symbology, Unpacking, Charging

SYMBOLOGY

V~

A

Double Insulated

Canadian Standards Association

Underwriters

Laboratories, Inc.

Volts Alternating Current

Amperes

no	No Load Revolutions
xxxx/min.	per Minute (RPM)

UNPACKING

When unpacking, check to make sure that the product is complete and undamaged (see Parts List on page 14 for reference). If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

CHARGING

1.NOTE: The Battery Pack (4) requires charging. The first charge requires 5 hours charge time prior to using the Cordless Drill.

2.Note: Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can be permanently damaged. Never over-discharge a battery by using the tool even after tool perfor- mance is decreasing. Never attempt to discharge a tool’s battery by continuing to pull the tool trigger. When tool performance begins to diminish, stop the tool, recharge the battery and use the fresh battery for optimal performance.

SKU 90120 For technical questions, please call 1-800-444-3353. PAGE 9