Hilti TE 7-C Insert tools, accessories, Technical data, Using extension cords outdoors

en

2.9 Using extension cords outdoors

When working outdoors, use only extension cords that are approved and correspondingly marked for this application.

2.10 Using a generator or transformer

This power tool may be powered by a generator or transformer which fulfills the following conditions: The unit must provide a power output in watts of at least twice the value printed on the rating plate on the power tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and starting boost.

Never operate other power tools or appliances from the generator or transformer at the same time. Switching other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the power tool.

3. Insert tools, accessories

Designation	Description
Chucks	TE‑C CLICK
Hammer drill bits	Ø 5…28 mm
Forming and installation drill bits	Ø 5…20 mm
Lightweight percussion core bits	Ø 25…68 mm
Multipurpose hole saws	Ø 25…82 mm, hexagonal
Pointed chisel	C-type connection end
Flat chisel	C-type connection end
Shaped chisels	C-type connection end
Anchor-setting tools	C-type connection end
Quick-release chuck for wood and metal drill bits	For smooth or hex. shank
Key-type chuck	With smooth or hex. shank
Wood drill bits	Ø 3…20 mm
Metal drill bits	Ø Max. 13 mm
Metal drill bits / stepped drill bits	Ø 5…22 mm

Designation	Description
Dust module	TE DRS-M
Angular chuck	C-type connection end

4. Technical data

Right of technical changes reserved.

NOTE

The power tool is available in various voltage ratings. Please refer to the power tool’s type identification plate for details of its rated voltage and rated input power.

4