DeWalt DC730KAR manual Important Safety Instructions for All

ENGLISH

Labels on tool		rechargeable batteries. Any other uses
DATE CODE POSITION		may result in risk of fire, electric shock or
		electrocution.
Date Code, which also includes the year of
	•	Do not expose charger to rain or snow.
manufacture, is printed into the housing surface that	•	Pull by plug rather than cord when
forms the mounting joint between tool and battery!
		disconnecting charger. This will reduce risk of
Example:
		damage to electric plug and cord.
2007 XX XX	•	Make sure that cord is located so that it
Year of Manufacture
		will not be stepped on, tripped over, or	.
Important Safety Instructions for All		otherwise subjected to damage or stress.
	•	Do not use an extension cord unless it
Battery Chargers		is absolutely necessary. Use of improper
SAVE THESE INSTRUCTIONS: This manual		extension cord could result in risk of fire, electric
		shock, or electrocution.
contains important safety and operating instructions
	•	An extension cord must have adequate wire
for the DE9130, DE9135 and DE9116 battery
chargers.		size (AWG or American Wire Gauge) for
		safety. The smaller the gauge number of the
• Before using charger, read all instructions and
		wire, the greater the capacity of the cable, that
cautionary markings on charger, battery pack,
		is 16 gauge has more capacity than 18 gauge.
and product using battery pack.
		When using more than one extension to make
DANGER: Electrocution hazard. 230
		up the total length, be sure each individual
volts are present at charging terminals.
		extension contains at least the minimum wire
Do not probe with conductive objects.
		size.
Electric shock or electrocution may
	•	Do not place any object on top of charger
result.
WARNING: Shock hazard. Do not allow		or place the charger on a soft surface that
		might block the ventilation slots and result
any liquid to get inside charger. Electric
		in excessive internal heat. Place the charger
shock may result.
		in a position away from any heat source. The
CAUTION: Burn hazard. To reduce
		charger is ventilated through slots in the top and
the risk of injury, charge only DEWALT
		the bottom of the housing.
rechargeable batteries. Other types of
	•	Do not operate charger with damaged cord
batteries may burst causing personal
injury and damage.		or plug — have them replaced immediately.
	•
CAUTION: Under certain conditions,		Do not operate charger if it has received
with the charger plugged in to the		a sharp blow, been dropped, or otherwise
		damaged in any way. Take it to an authorized
power supply, the exposed charging
		service center.
contacts inside the charger can be
	•
shorted by foreign material. Foreign		Do not disassemble charger; take it to an
materials of a conductive nature such		authorized service center when service or
as, but not limited to, steel wool,		repair is required. Incorrect reassembly may
aluminum foil, or any buildup of metallic		result in a risk of electric shock, electrocution or
particles should be kept away from		fire.
charger cavities. Always unplug the	•	Disconnect the charger from the outlet
charger from the power supply when
		before attempting any cleaning. This will
there is no battery pack in the cavity.		reduce the risk of electric shock. Removing
Unplug charger before attempting to		the battery pack will not reduce this risk.
clean.
	•	NEVER attempt to connect 2 chargers together.
• DO NOT attempt to charge the battery pack
	•	The charger is designed to operate on
with any chargers other than the ones in
this manual. The charger and battery pack are		standard 230V household electrical power.
		Do not attempt to use it on any other
specifically designed to work together
		voltage. This does not apply to the vehicular
• These chargers are not intended for
		charger.
any uses other than charging DEWALT
		SAVE THESE INSTRUCTIONS

9