Here are examples
of what a SEARS
Craftsmantool can
do...
Sharpen Tools | Precise Ddliing | Shape Wood |
[
Cawe Wood | Deburr |
Metal | Cut Metal |
_The | operation of any power |
| toot can result in foreign |
objects being thrown into the eyes, which can result in severe eye damage Always wear safety glasses or eye shields before com- mencing power tool operation, We recommend Wide Vision Safety Mask for use over spectacles or standard safety glasses
Whenever you hold the tool, be careful not to
cover the air vents with your hand This blocks the air flow and causes the motor to overheat
_ | Always unplug rotary tool |
before changing acces- sories, changing collets or servicing your rotary toolo
COLLET
lock engages the shaft preventing further rotation.
,,..,o0,
_Donot engage loci( while the Rotary Tool Is running.
With the shaft lock engaged use the coilet wrench to loosen the collet nut if necessary Change accessories by inserting the new one into tl_e collet as far as possible to minimize runout and unbalance. With the shaft lock
engaged, finger tighten the coflet nut until the accessory shank is gripped by the co!let Avoid excessive tightening of the collet nut The
collet system is a superior method of seeudng
accessoi3es
COLLETS _ Two different size coliets (see illustration),to accommodate different shank sizes, are available for your Rotary Tool, To instatl a different cofiet, remove the cotlet nut and remove the old colleL Insert the unslotted end of the coltet in the hole in the end of the
tool shaft,, Replace coIIet nut on the shaft.
Always use the collet which matches the shank size of the accessory you plan to
uSe,rNever force a larger diameter shank into a coltst
COLLETIDENTIFICATIONCHART-- Coltetsizesc-_
be identifiedby the rings on theback end of eollet I
1/32" | Co[lethas one (t) | ring | |
!/16" | Collet has two (2) | rings | |
3/32" Cotlef has three (3) rings | |||
1/8" CoHethas no rings |
| J | |
/
/
BALANCING ACCESSORIES
precision work, it is important that all accessories be in good ba;ance (much the same as the tires on your automobile} To true up or balance an accessory, slightly loosen collet nut and give the accessory or collat a 1/4 turn. Retighten coflet nut and nJn the Rotary Tool. You should be able to teff by the sound and feel if your accessory is running m
balance. Continue adjusting in this fashion until best balance is achieved To maintain
balance on abrasive wheel points, before each use, with the wheel point secured in the co]let, turn on the Rotary Tool and run the Dressing Stone lightly against the revolving wheel point This removes high spots and trues up the wheel point for good balance
Do not use grinding wheels over 1" in dia-
meter. Rotary Tool's high speed can cause larger wheels to fly apart and could cause
injury,
SAFETY
Remember, your new Sears Rotary Tool is the finest power tool of its kind But its
performance is only as good as the accessories with which it is used. We
recommend only Sears accessories be used. Use of any other accessories may create a hazard We hope you'llenjoy many years of trouble free pleasure from your Sears Craftsman Rotary Power Tool
\TOTIfiHTEN
\ tC0LLEr
_._ | |
- |
|
TOLOOSEN | COLLET 118"COLLET 25037 |
| 3/32"COLLET |
ACCESSORIES
USE ONLY RECOMMENDED ]
Page 3