Delta DP200 Fastening Drill Press to Supporting Surface, Starting and Stopping Drill Press

Page 10

10.IMPORTANT: Make certain the spindle taper (Q) Fig. 15, and tapered hole in chuck (R) are clean and free of any grease, lacquer or rust preventive coatings. NOTE: Household oven cleaner can effectively remove any sub- stance from the spindle and chuck; however, carefully follow the manufacturer's safety rules concerning its use.

11.IMPORTANT: Open the chuck jaws as wide as possible by turning the chuck sleeve (S) Fig. 16.

12.Holding chuck on taper of spindle, tap with a soft tip hammer (T) or a block of wood and hammer to set chuck, as shown in Fig. 16. IMPORTANT: To avoid damage to the chuck, NEVER drive the chuck onto the spindle with a metal hammer.

Q

R

Fig. 15

S

T

Fig. 16

FASTENING DRILL PRESS TO SUPPORTING SURFACE

If during operation there is any tendency for the machine to tip over, slide or walk on the supporting surface, the machine base must be secured to the supporting surface with a M8x1.25x125mm carriage head screw, 8.5mm flat washer, 8.5mm lock washer, M8x1.25 hex nut, through the two holes (A) Fig. 17, located in the machine base.

A

Fig. 17

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING

DRILL PRESS

The switch (A) Fig. 18, is located on the front of the drill press head. To turn the drill press “ON” move the switch up to the “ON” position. To turn the drill press “OFF” move the switch down to the “OFF” position.

A

Fig. 18

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Bench Drill Press General Safety Rules Additional Safety Rules for For Drill Presses Motor Specifications Power ConnectionsGrounding Instructions Unpacking and Cleaning Extension CordsDrill Press Parts Assembly Being Careful not to Overtighten Page Fastening Drill Press to Supporting Surface Starting and Stopping Drill PressTable Adjustments Locking Switch OFF PositionFlexible Lamp Changing Speeds and Adjusting Belt Tension Spindle SpeedsAdjusting Spindle Return Spring Drilling Holes to DepthInstalling and Removing Drill Bits OperationBoring in Wood Correct Drilling SpeedsDrilling Metal Accessories PARTS, Service or Warranty Assistance

DP200 specifications

The Delta DP200 is a cutting-edge 3D printer designed specifically for professionals and enthusiasts seeking an accessible and versatile solution for additive manufacturing. With its user-friendly interface and advanced features, the DP200 stands out in the ever-evolving landscape of 3D printing technology.

One of the main features of the Delta DP200 is its delta configuration, which allows for high-speed printing without sacrificing precision. The delta architecture utilizes three independent arms connected to a print head, enabling smooth and rapid movement across the build area. This design results in reduced printing times and higher accuracy, making it ideal for detailed projects.

The DP200 incorporates a robust and reliable extruder system, which supports a wide range of materials, including PLA, ABS, and PETG. The ability to use multiple filament types ensures that users can experiment with different colors, strengths, and finishes to achieve the desired results. Additionally, the printer’s heated build plate aids in material adhesion, reducing the risk of warping during the printing process.

Another significant characteristic of the Delta DP200 is its enclosed build chamber. This feature enhances temperature control and minimizes external environmental factors, allowing for the consistent printing of complex models. The enclosed design also improves safety, ensuring that users can operate the machine with peace of mind.

The printer boasts a high-resolution print capability, with layer heights as low as 50 microns. This level of detail is particularly beneficial for producing intricate designs, prototypes, and small-scale production runs. The seamless integration of a smart leveling system further elevates the user experience, as it aids in maintaining the perfect distance between the nozzle and the print bed.

Connectivity options on the Delta DP200 are versatile, featuring USB, SD card, and Wi-Fi capabilities. This allows users to easily upload designs and manage print jobs from various devices, facilitating a more efficient workflow.

Moreover, Delta’s proprietary slicing software is tailored for optimal performance with the DP200. This software includes features such as customizable settings, print previews, and support generation, helping users fine-tune their print projects with precision.

In summary, the Delta DP200 is a feature-rich 3D printer that combines speed, precision, and versatility. With its delta architecture, broad material compatibility, enclosure for enhanced safety, and high-resolution output capabilities, it is an excellent choice for both beginners and experienced 3D printing enthusiasts looking to push the boundaries of their creativity.
Top Page Image Contents