ASSEMBLING
Washer
Front handle
Plug Chuck Drill bit (Tighten three points evenly)
FRONT HANDLE
•Insert the front handle to the machine, and turn clockwise.
(TIGHTEN THE SCREW FIRMLY)
-To operate front handle with right hand, remove right plug then reverse sides when installing handle and plug.
DRILL BIT
•Insert the drill bit (not provided with unit) until it reaches the bottom of the chuck, then back it out slightly; tighten the chuck laws evenly and completely.
IMPORTANT
Use drill bits suited for the material being drilled and for the depth of hole required.
OPERATION
Oil |
| 1 |
| ||
|
Gasoline50
Fuel mix chart (50 : 1)
| US | METRIC |
| ||
|
|
|
|
|
|
GAS |
| OIL | GAS |
| OIL |
|
|
|
|
|
|
GAL. |
| FL.OZ. | L |
| mL |
|
|
|
|
|
|
1 |
| 2.6 | 4 |
| 80 |
2 |
| 5.1 | 8 |
| 160 |
5 |
| 12.8 | 20 |
| 400 |
|
|
|
|
|
|
CHECK UP OF NUTS AND OTHER HARDWARES
•Check up loose nuts, bolts and screws before using the unit every day.
FUEL STATEMENT
GASOLINE - Use 89 Octane [(R+M) / 2] gasoline or gasohol known to be good quality- Gasohol may contain maximum 10% ethyl (grain) alcohol or 15% MTBE (methyl tertiary- butyl ether). Gasohol containing methyl (wood) alcohol is not approved.
OIL - ECHO brand premium
MIXING - Follow directions on the container.
7