INSTALLATION TO A
WALLMOUNT BASE
9
Carefully turn the storage case over so the bottom of the storage case is facing up.
Place the base upside down onto the storage case with the two legs toward the front of the cabinet.
Make sure the back rail is flush with the back and sides of the storage case.
10
Insert screws into the holes in the corner brackets of the base.
Secure the base to the storage case.
Carefully turn the assembly right!side up and position
against the wall where it is to be installed.
11
Verify that the storage case is level, both front!to!back and side!to!side. If the storage case is not level, adjust by turning the leveling feet as needed.
Make sure that the storage case is supported by both feet and does not rock.
Insert Screws
Here
Leg
Foot
Leveling
Foot
86216 2 | 4 | Kohler o., Kohler, WI |