Kohler 86216 2 BA Installing Storag ASS Sitosi, Installing Stainlss STL or Ston TOP Optional

INSTALLING STORAG￿ ￿AS￿S SI￿￿￿TO￿SI￿￿

￿5￿

NOTE:￿Make sure to drill each cabinet separately. ￿o not try to drill through both storage cases at once.

NOTE:￿Make sure to drill through the same sets of partially drilled holes in each storage case so they will line up properly.

￿ecide which sides of each cabinet will be connected to the other. ￿rill through the top and bottom sets of holes on the inside of both storage cases from inside toward the outside. Make sure to only drill through the side that will be facing the other storage case.

￿onnect the two storage cases with four 5 mm tapped sleeve connectors ￿not provided￿ through the drilled holes.

INSTALLING STAINL￿SS ST￿￿L OR STON￿ TOP (OPTIONAL)

￿6￿

Apply an ample amount of silicone sealant or construction adhesive to the center of the top of the storage case.

Place top on storage case making sure the back and side edges of the top are flush with the storage case.

Press firmly in place.

Top

Silicone Sealant or Construction Adhesive

Kohler Co., Kohler, WI 7 8￿21￿!2!￿￿ ￿!￿