| • | 3 m |
| • | 5 m |
| MD1280 to MD1280: |
| • | 0.6 m |
| • | 2 m |
| • | 4 m |
| • | 6 m |
| | NOTE: SAS connectors are SFF-8086/ |
| | SFF-8088-compliant. |
| | |
LED Indicators | | |
| | |
Front panel | • | One two-digit LCD indicator for Unit ID, error |
| | code, and unit location identifier |
| • One two-color LED indicator for power status |
| • One single-color LED indicator for module fault |
| | status (enclosure as a whole) |
| • One single-color LED indicator for logical fault |
| | status (drive, HBA, RAID controller, and so on) |
| • One single-color LED indicator for drive drawer |
| | 1 fault status |
| • One single-color LED indicator for drive drawer |
| | 2 fault status |
Drive drawer | • | One single-color LED indicator for sideplane |
| | card and power status |
| • One single-color LED indicator for drive drawer |
| | fault status |
| • One single-color LED indicator for logical fault |
| | status |
| • One single-color LED indicator for cable fault |
| | status |
| • Six single-color LED indicators for data transfer |
| | status |
Disk Drive In Carrier (DDIC) | One single-color LED for hard drive fault status |
6 Gb SAS IO module | 14 one-color LED status indicators, four each for |
| the three SAS ports, and two for the module status |
Cooling module | • | One single-color LED indicator for module |
| | status |
| • One single-color LED indicator for battery fault |
| | status (not currently used) |
| • One single-color LED indicator for fan fault |
| | status |
Power Supply Unit (PSU) | • | One single-color LED indicator for PSU fault |
| | status |
