Back-Panel Connectors (per EMM)
•Supports Mini-SAS HD to Mini-SAS cable universally keyed. The following lengths are currently supported:
SCv2080 to SC180:
–0.5 m
–2 m
–3 m
–5 m
| NOTE: SAS connectors are SFF-8086/SFF-8088 compliant. |
| |
LED Indicators | |
| |
Front panel | • One two-digit LCD indicator for Unit ID, error code, and unit location |
| identifier |
•One two-color LED indicator for power status
•One single-color LED indicator for module fault status (expansion enclosure as a whole)
•One single-color LED indicator for logical fault status (drive, HBA, RAID controller, and so on)
•One single-color LED indicator for drawer 1 fault status
•One single-color LED indicator for drawer 2 fault status
Drawer | • One single-color LED indicator for sideplane card and power status |
| • One single-color LED indicator for drawer fault status |
| • One single-color LED indicator for logical fault status |
| • One single-color LED indicator for cable fault status |
| • Six single-color LED indicators for data transfer status |
Disk Drive In Carrier | • One single-color LED for drive fault status |
(DDIC) | |
6 Gb SAS IO module | 14 one-color LED status indicators, four each for the three SAS ports and two |
| for the module status |
Cooling module | • One single-color LED indicator for module status |
| • One single-color LED indicator for battery fault status (not currently used) |
| • One single-color LED indicator for fan fault status |
Power Supply Unit (PSU) • One single-color LED indicator for PSU fault status
•One single-color LED indicator for AC power fault status
•One single-color LED indicator for power status
Power Supplies
AC power supply (per power supply)
Wattage | 2.8 kW |
Voltage | 200–240 VAC (16 A) |
Heat dissipation | 191-147 W |