Charging a Cool Battery Pack

OPERATION

If battery pack is within normal temperature range, the red LED on charger will come on.

NOTE: If the charger does not charge the battery pack under normal circumstances, return both the battery pack and charger to your nearest Ryobi Authorized Service Center for electrical check.

nCharge the battery pack only with the charger provided.

nMake sure the power supply is normal household voltage, 120 volts, 60 Hz, AC only.

nConnect the charger to the power supply.

nPlace the battery pack in the charger aligning raised rib on the battery pack with the groove in the charger. See

Figure 3.

nPress down on the battery pack to be sure contacts on the battery pack engage properly with contacts in the charger.

nNormally the red LED on charger will come on. This indicates the charger is in fast charging mode.

nRed LED should remain on for approximately 1 hour then the green LED will come on. Green LED on indicates battery pack is fully charged and charger is in maintenance charge mode.

NOTE: The green LED will remain on until the battery pack is removed from the charger or charger is disconnected from the power supply.

nIf both yellow and green LEDs come on, this indi- cates a deeply discharged or defective battery pack. Allow the battery pack to remain in the charger for 15 to 30 minutes. When the battery pack reaches normal voltage range, the red LED should come on. If the red LED does not come on after 30 minutes, this may indicate a defective battery pack and should be replaced.

nAfter normal usage, a minimum of 1 hour of charging time is required to fully recharge battery pack.

nThe battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.

BATTERY PACK

P100

CHARGER

P110

Fig. 3

nDo not place the charger and battery pack in an area of extreme heat or cold. They will work best at normal room temperature.

NOTE: The charger and battery pack should be placed in a location where the temperature is more than 50°F but less than 100°F.

nWhen batteries become fully charged, unplug the charger from power supply and remove the battery pack.

CHARGING A HOT BATTERY PACK

When using the tool continuously, the batteries in the battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing.

P310 specifications

The Ryobi P310 is a versatile and powerful cordless pneumatic brad nailer, designed for both professionals and DIY enthusiasts. This nailer is part of the Ryobi ONE+ system, allowing users to utilize the same battery across a range of Ryobi tools, enhancing convenience and efficiency on the job site.

One of the standout features of the P310 is its robust motor that delivers a consistent driving force. This ensures that the brads are securely and accurately driven into various materials, including hardwoods, softwoods, and engineered wood. The tool is capable of driving 18-gauge brads ranging from 3/8-inch to 2 inches, making it perfect for a wide array of applications such as crown molding, trim work, and furniture assembly.

The P310 is equipped with advanced technology that improves user experience and performance. The tool boasts a dry-fire lockout mechanism, which prevents the nailer from firing when no nails are loaded, helping to protect the work surface from damage. Additionally, the adjustable depth of drive control enables users to set the depth of the nail according to the material being worked on, ensuring a clean and professional finish.

Another highlight of the Ryobi P310 is its lightweight and compact design. Weighing approximately 5.8 pounds, this brad nailer is easy to maneuver, reducing fatigue during prolonged use. The rubberized grip provides comfort and additional control, allowing users to tackle projects without straining their hands.

The nailer is also designed for easy maintenance. Its tool-free jam release mechanism allows users to quickly and easily clear any jammed nails, minimizing downtime and keeping projects on track. The onboard storage for an additional battery further enhances portability, making it a suitable choice for those on-the-go.

Safety features have also been considered in the design of the P310. The trigger has a safety mechanism that prevents accidental firing, ensuring that the tool is only activated when intended.

Overall, the Ryobi P310 is a reliable and efficient brad nailer that combines power, convenience, and safety features, making it an indispensable tool for anyone looking to enhance their woodworking capabilities. Whether you're tackling a home improvement project or working in a professional setting, the P310 stands out as a top choice for precision nailing.