Safety Rules for Charger

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

nBefore using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.

CAUTION:

To reduce the risk of electric shock or damage to the charger and battery, charge only nickel-cadmium rechargeable batteries as specifically designated on your charger. Other types of batteries may burst, causing per- sonal injury or damage.

nDo not use charger outdoors or expose to wet or damp conditions. Water entering charger will increase the risk of electric shock.

nUse of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

nDo not abuse cord or charger. Never use the cord to carry the charger. Do not pull the charger cord rather than the plug when disconnecting from receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.

nMake sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury, and damage to the cord, which could result in electric shock.

nKeep cord and charger from heat to prevent damage to housing or internal parts.

nDo not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.

n An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b. That extension cord is properly wired and in good electrical condition; and

c. That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet)	25'	50'	100'
Cord Size (AWG)	16	16	16

NOTE: AWG = American Wire Gauge

n Do not operate charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger replaced by an authorized serviceman.

nDo not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized serviceman for electrical check to determine if the charger is in good working order.

nDo not disassemble charger. Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

nUnplug charger from outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.

nDisconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It also will help prevent damage to the charger during a power surge.

nRisk of electric shock. Do not touch uninsulated portion of output connector or uninsulated battery terminal.

nSave these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

P310 specifications

The Ryobi P310 is a versatile and powerful cordless pneumatic brad nailer, designed for both professionals and DIY enthusiasts. This nailer is part of the Ryobi ONE+ system, allowing users to utilize the same battery across a range of Ryobi tools, enhancing convenience and efficiency on the job site.

One of the standout features of the P310 is its robust motor that delivers a consistent driving force. This ensures that the brads are securely and accurately driven into various materials, including hardwoods, softwoods, and engineered wood. The tool is capable of driving 18-gauge brads ranging from 3/8-inch to 2 inches, making it perfect for a wide array of applications such as crown molding, trim work, and furniture assembly.

The P310 is equipped with advanced technology that improves user experience and performance. The tool boasts a dry-fire lockout mechanism, which prevents the nailer from firing when no nails are loaded, helping to protect the work surface from damage. Additionally, the adjustable depth of drive control enables users to set the depth of the nail according to the material being worked on, ensuring a clean and professional finish.

Another highlight of the Ryobi P310 is its lightweight and compact design. Weighing approximately 5.8 pounds, this brad nailer is easy to maneuver, reducing fatigue during prolonged use. The rubberized grip provides comfort and additional control, allowing users to tackle projects without straining their hands.

The nailer is also designed for easy maintenance. Its tool-free jam release mechanism allows users to quickly and easily clear any jammed nails, minimizing downtime and keeping projects on track. The onboard storage for an additional battery further enhances portability, making it a suitable choice for those on-the-go.

Safety features have also been considered in the design of the P310. The trigger has a safety mechanism that prevents accidental firing, ensuring that the tool is only activated when intended.

Overall, the Ryobi P310 is a reliable and efficient brad nailer that combines power, convenience, and safety features, making it an indispensable tool for anyone looking to enhance their woodworking capabilities. Whether you're tackling a home improvement project or working in a professional setting, the P310 stands out as a top choice for precision nailing.