Ryobi HP1442M, HP1802M manual Maintenance, Batteries, Disposal of the Exhausted Battery

Page 15

MAINTENANCE

WARNING:

When servicing use only identical Ryobi replacement parts. Use of any other parts can create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use a clean cloth to remove dirt, oil, grease, etc.

DO NOT ABUSE POWER TOOLS. Abusive practices can damage the tool, as well as the workpiece.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

CAUTION:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. They contain chemicals that may damage, weaken, or destroy plastics.

CAUTION:

Any repairs requiring disassembly should only be performed by a Ryobi Authorized Service Center. For the repair center nearest you, call 1-800-525-2579.

BATTERIES

Your drill is equipped with Nickel-Cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in serious burn.

To obtain the longest possible battery life, we suggest the following:

Store and charge your batteries in a cool area. Temperatures above or below normal room temperature will shorten battery life.

Never store batteries in a discharged condition. Wait for battery to cool and charge immediately.

All batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

 

CYC

 

E

L

R

 

 

E

R B R C

 

DISPOSAL OF THE EXHAUSTED BATTERY

To preserve natural resources, please BATTERY PACK PREPARATION FOR RECYCLING recycle or dispose of properly.

 

 

 

 

 

 

 

 

This product contains nickel-cadmium

.

N i

C d

 

 

7

battery. Must be disposed of properly. Local,

1

 

 

 

 

 

3

 

 

8

 

 

 

 

 

 

 

 

 

 

 

8

 

 

0

 

 

 

 

state, or federal laws may prohibit disposal

 

0.

 

 

8

 

 

 

.

 

 

 

 

 

 

8

22

 

 

 

 

of Nickel-Cadmium batteries in ordinary

 

 

 

 

 

 

 

 

trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

For more information on battery recycling call 1-800- 8BATTERY.

WARNING:

Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Also, never touch both terminals with metal objects and/or body parts, as short circuit can result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

WARNING:

Do not attempt to disassemble the battery pack. Fire or injury can result.

Page 15

Image 15
Contents Thank YOU for Buying a Ryobi Cordless DRILL-DRIVER Save this Manual for Future ReferenceTable of Contents General Safety RulesTool Use and Care Specific Safety Rules AND/OR SymbolsService Important Rules for Battery ToolsImportant Safety Instructions For Charger Symbols Symbol Meaning Safety Alert SymbolSymbol Name DESIGNATION/EXPLANATION Features Model HP1442M TWO Speed Torque Gear Train HI-LO Adjustment RingTo Charge OperationLED Function of Charger Charging Your DRILL-DRIVERReverse ReversibleGrip Tighten Chuck Body To Install Battery PackTo Remove Battery Pack Chuck CollarInstalling Bits Removing BitsMAG Tray Screwdriving Torque Adjustment To Adjust TorqueLevel Drilling Level END View DrillingChuck Removal To Retighten a Loose ChuckKeyless Chuck HEX KEY Wrench Maintenance Disposal of the Exhausted BatteryBatteries Operators Manual Cordless DRILL-DRIVER