Ryobi HP1802M, HP1442M manual Important Safety Instructions For Charger

Page 4

SPECIFIC SAFETY RULES AND/OR SYMBOLS

WARNING:

A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery.

Important Safety Instructions For Charger

Save these instructions. This manual contains im- portant safety and operating instructions for charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger. Follow- ing this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce risk of injury, charge only nickel-cadmium and nickel metal hydride type rechargeable batter- ies. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not expose charger to wet or damp conditions. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when discon- necting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury.

An extension cord should not be used unless abso- lutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is properly wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet)

25'

50'

100'

Cord Size (AWG)

16

16

16

Note: AWG = American Wire Gage

Do not operate charger with a damaged cord or plug. If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incor- rect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

DANGER:

RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BATTERY TERMINAL.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi- cals known to cause cancer, birth defects or other repro- ductive harm. Some examples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Page 4

Image 4
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Cordless DRILL-DRIVERGeneral Safety Rules Table of ContentsSpecific Safety Rules AND/OR Symbols ServiceImportant Rules for Battery Tools Tool Use and CareImportant Safety Instructions For Charger Symbol Meaning Safety Alert Symbol SymbolsSymbol Name DESIGNATION/EXPLANATION Features TWO Speed Torque Gear Train HI-LO Adjustment Ring Model HP1442MOperation LED Function of ChargerCharging Your DRILL-DRIVER To ChargeReversible ReverseTo Install Battery Pack To Remove Battery PackChuck Collar Grip Tighten Chuck BodyRemoving Bits Installing BitsMAG Tray To Adjust Torque Screwdriving Torque AdjustmentLevel Drilling Drilling Level END ViewTo Retighten a Loose Chuck Chuck RemovalKeyless Chuck HEX KEY Wrench Disposal of the Exhausted Battery MaintenanceBatteries Operators Manual Cordless DRILL-DRIVER