Ryobi RY1201, RY721, RY961 manual Precautions on Using Your Cordless Tool

Page 4

RULES FOR SAFE OPERATION (Continued)

when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents.

■ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

■PROTECT YOUR LUNGS. Wear a face mask or dust mask if operation is dusty.

■PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.

■SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool.

■DON'T OVERREACH. Keep proper footing and balance at all times. Do not use on a ladder or unstable support.

■MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

■REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

■AVOID UNINTENTIONAL STARTING. Do not carry the tool with your finger on the switch. Be sure switch is off when installing battery pack.

■STAY ALERT. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.

■CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this instruction manual.

■DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by a Ryobi Authorized Service Center.

■DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

■INSPECT FOR and remove all nails from lumber before drilling.

■DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

PRECAUTIONS ON USING YOUR

CORDLESS TOOL

This product contains Nickel-Cadmium batteries which must be disposed of properly.

■Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.

■First, charge the battery.

■Be sure the battery is snapped in place.

■When not in use, lock the switch.

■When operating at a high place, be aware of things below you.

■Before drilling into walls, ceilings, or floors, make sure that there are no concealed power cables inside.

WARNING:

Drilling into electrical wiring in walls can cause drill bit and chuck to become electrically live. Do not touch the chuck or metal housing when drilling into a wall; grasp only the insulated handle(s) provided on the tool.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER/CHARGING ASSEMBLY

■SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for charging the battery with the following components:

MODEL

BATTERY

CHARGER

CHARGING ASSEMBLY

RY721

1400668

4400100

N/A

RY961

1400669

N/A

981351-001

RY1201

1400652

N/A

981351-002

■Before using battery charger/charging assembly, read all instructions and cautionary markings on (1) battery charger, (2) battery, (3) charging assembly, and (4) products using battery.

WARNING:

To reduce risk of injury, charge only nickel- cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

■Do not expose charger/charging assembly to rain or snow.

■Use of an attachment not recommended or sold by the battery charger/charging assembly manufacturer may result in a risk of fire, electric shock, or injury to persons.

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operators Manual Cordless DRILL-DRIVER Thank YOU for Buying a Ryobi Cordless DRILL-DRIVERTable of Contents Typical ApplicationsSymbol Meaning Safety Alert Symbol Rules for Safe OperationKnow Your Cordless Tool Read ALL InstructionsPrecautions on Using Your Cordless Tool Important Safety Instructions for CHARGER/CHARGING AssemblyService Center Specifications Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling Important Information for Recharging HOT BatteriesOperation Know Your DRILL-DRIVERCharging Your DRILL-DRIVER To Charge Model NO. RY721Switch Switch LockTo Install Battery Pack To Remove Battery PackInstalling Bits ReversibleKeyless Chuck Right WrongRemoving Bits ScrewdrivingBIT Storage Level DrillingDrilling Chuck Removal To Retighten a Loose ChuckSee Figures 13, 14, Mallet Chuck Jaws Keyless ChuckMaintenance BatteriesService Model NO. and Serial no Model Number RY721/RY961/RY1201

RY721, RY1201, RY961 specifications

Ryobi is a brand synonymous with innovation and reliability in the power tool industry, and their lineup, including models like the RY961, RY1201, and RY721, exemplifies these values. These tools cater to a variety of tasks, ranging from household projects to more demanding outdoor work, thanks to their robust features and advanced technologies.

The Ryobi RY961 is a versatile tool that stands out due to its lightweight design and exceptional maneuverability. Featuring a powerful electric motor, it ensures efficient performance while keeping noise levels to a minimum. The RY961 is equipped with an adjustable cutting depth, which allows users to customize their approach depending on the material being worked on. Additionally, its ergonomic handle provides a comfortable grip, reducing fatigue during extended use. One of its significant innovations is the ProGear technology, which enables smoother operation and improved torque transmission, making it an ideal choice for both beginners and seasoned DIY enthusiasts.

Moving to the RY1201, this model is tailored for users looking for a robust power tool with more advanced capabilities. The RY1201 features a high-capacity lithium-ion battery, ensuring longer runtimes and quick charging times. Its intelligent control system monitors power usage and optimizes performance based on the task at hand. This model is also complemented by a range of attachments, allowing for versatility in tasks such as cutting, sanding, and more. The inclusion of Ryobi’s One+ system means that users can interchange batteries across different tools, providing added convenience and reducing the need for multiple chargers.

Lastly, the Ryobi RY721 is known for its user-friendly interface and safety features. This model incorporates a safety lock mechanism to prevent accidental starts, making it suitable for users of all skill levels. The RY721 also offers a unique dust extraction system that helps keep work areas clean, thereby enhancing visibility and safety. With features such as variable speed settings, users can easily adjust the tool's performance according to the requirements of the job.

In summary, the Ryobi RY961, RY1201, and RY721 are representative of the brand's commitment to quality and user satisfaction. With advanced technologies, ergonomic designs, and multifaceted functionalities, these tools promise to enhance productivity for both casual users and serious DIY enthusiasts alike. Whether it's a simple home improvement task or a complex outdoor project, Ryobi tools are engineered to tackle challenges with ease and efficiency.
Top Page Image Contents