Ryobi DP120 warranty Product Specifications, Table of Contents

	TABLE OF CONTENTS
■ Product Specifications	2
■ Rules for Safe Operation	3-5
■ Electrical	6
■ Glossary of Terms and Unpacking	7
■ Loose Parts	8
■ Features	9
■ Assembly	10-11
■ Adjustments	11-12
■ Operation	13-14
■ Maintenance	15
■ Troubleshooting	16
■ Parts Ordering/Service	18

PRODUCT SPECIFICATIONS

Chuck	1/2 in. (13 mm)
No Load Speed	280 - 3000 RPM
Swing	12 in. (305 mm)

Spindle Travel	3-1/4 in. (82 mm)
Input	120V AC, 60Hz, 5 amps
Net Weight	84 lbs (38 kg)

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

SAFETY AND INTERNATIONAL SYMBOLS

This operator’s manual describes safety and international symbols and pictographs that may appear on this product. Read the operator’s manual for complete safety, assembly, operating and maintenance, and repair information.

MEANING

Do not expose to rain or use in damp locations

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

2