Ryobi HD501 specifications Owners Operating Manual, Ryobi TECHNOLOGIES, INC

Page 16

OWNER'S OPERATING MANUAL

1/2 in. (13 mm) Hammer Drill - HD501

DOUBLE INSULATED

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords should be used.

**Ampere rating

(on tool data plate)

0-2.0

2.1-3.4 3.5-5.0 5.1-7.0

7.1-12.0

12.1-16.0

 

 

 

 

 

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

When working with a tool outdoors, use an extension cord that is designed for outside use. This is indicated by the letters "WA" on the cord's jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

100' 16 16 14 12 10 —

CAUTION: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on workpiece, tools, or other obstructions while you are working with a power tool.

**Used on 12 gauge - 20 amp circuit.

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

• MODEL NO.

The model number of your tool will be found on a plate attached to the motor housing. Please record the model number and serial number in the space provided below.

• MODEL NUMBER

HD501

SERIAL NUMBER

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road

Anderson SC 29625

Post Office Box 1207

Anderson SC 29622

Phone 1-800-525-2579

www.ryobitools.com

972000-947

10-01

Image 16
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Hammer DrillTable of Contents IntroductionSymbol Meaning Safety Alert Symbol General Safety RulesRules for Safe Operation Specific Safety Rules Tool Use and CareSymbols Symbol Name DESIGNATION/EXPLANATIONElectrical UnpackingExtension Cords Packing ListFeatures Auxiliary Handle Assemblymode Selector Depth Gage RODOperation Auxiliary Handle Assembly Variable SpeedVariable Speed Control Selector Decrease SpeedTo Adjust Drilling Mode Using Depth Gage RODDrill BIT To Install Bits To Remove BitsRight Wrong Unplug Your Hammer DrillTWO-SPEED Gear Shift Knob DrillingDo not Shift Speeds While Tool is Running LOWTo Retighten a Loose Chuck Chuck RemovalMallet Chuck Jaws HEX KEY Screwdriver General MaintenanceLubrication Page Owners Operating Manual Ryobi TECHNOLOGIES, INC