Ryobi HD501 specifications Save this Manual for Future Reference

Page 1

OPERATOR'S MANUAL

HD501 - 1/2 in. (13 mm) Hammer Drill

DOUBLE INSULATED

 

SPECIFICATIONS:

 

 

Chuck Capacity

1/16 in. (1.5 mm) - 1/2 in. (13 mm)

 

 

Rating

120 volts, 60Hz, AC only, 5.5 Amperes

 

 

No Load Speed

0 - 1,000 & 0 - 3,000 RPM

 

 

Hammer Speed

0 - 48,000 BPM

 

 

Switch

Adjustable Variable Speed/Reversible

THANK YOU FOR BUYING A RYOBI HAMMER DRILL.

Your new hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new hammer drill.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your hammer drill properly and only for what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so we can be of future service to you.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1
Contents Thank YOU for Buying a Ryobi Hammer Drill Save this Manual for Future ReferenceIntroduction Table of ContentsSymbol Meaning Safety Alert Symbol General Safety RulesRules for Safe Operation Tool Use and Care Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsUnpacking ElectricalExtension Cords Packing ListAuxiliary Handle Assemblymode Selector Depth Gage ROD FeaturesOperation Variable Speed Auxiliary Handle AssemblyVariable Speed Control Selector Decrease SpeedTo Adjust Drilling Mode Using Depth Gage RODDrill BIT To Remove Bits To Install BitsRight Wrong Unplug Your Hammer DrillDrilling TWO-SPEED Gear Shift KnobDo not Shift Speeds While Tool is Running LOWTo Retighten a Loose Chuck Chuck RemovalMallet Chuck Jaws HEX KEY Screwdriver General MaintenanceLubrication Page Ryobi TECHNOLOGIES, INC Owners Operating Manual