Ryobi D551H manual General Safety Rules, Work Area, Electrical Safety, Personal Safety

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

n Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

nDo not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

nKeep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

nDouble insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three- wire grounded power cord and grounded power supply system.

nAvoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

nDon’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec- tric shock.

nDo not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

nWhen operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

nStay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

nDress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

n Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

nRemove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

nDo not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

nUse safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

nDo not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

nDo not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

nUse clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

nDo not force tool. Use the correct tool for your appli- cation. The correct tool will do the job better and safer at the rate for which it is designed.

nDo not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

nDisconnect the plug from power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

nStore idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

nMaintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

nCheck for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

nUse only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

nKeep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when clean- ing. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

3

Image 3
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionProduct Specifications FeaturesFeatures Packing List AssemblyOperation UnpackingAdjusting the Auxiliary Handle Assembly Inserting BitsRemoving Bits Adjusting the Depth Gauge ROD Adjusting the Drill ModeAdjusting the Speed Turning the Hammer Drill ON/OFF Changing the RotationLocking on Helpful Tips MaintenanceGeneral Maintenance DrillingLubrication Removing the ChuckTightening a Loose Chuck Service Model NO. and Serial no

D551H specifications

The Ryobi D551H is a highly regarded pneumatic nailer designed for both professionals and DIY enthusiasts. This tool stands out due to its powerful capabilities and thoughtful features, making it an essential addition to any woodworking toolkit.

One of the key features of the Ryobi D551H is its ability to drive a range of fasteners with exceptional precision. This nailer accommodates 16-gauge finishing nails, delivering the power necessary for securing trim, molding, and other intricate woodworking applications. The tool’s depth adjustment feature allows users to customize the depth of each nail, ensuring a clean and professional finish every time.

The Ryobi D551H also boasts a powerful motor that drives nails quickly and consistently. This pneumatic design is effective for high-volume jobs, reducing fatigue and time spent on the job site. Its lightweight construction enhances portability, making it easy to maneuver in tight spaces and ideal for long periods of use.

Another notable technology in the D551H is its built-in oil-free design. This eliminates the need for regular maintenance associated with oil-based nailers, allowing users to focus more on their projects rather than upkeep. Additionally, the tool features an adjustable exhaust that directs air away from the user, keeping the workspace clean and comfortable.

Safety is a priority in the design of the Ryobi D551H. The tool includes a trigger lock that prevents accidental firing, ensuring that users can work confidently and securely. Combined with a no-mar tip that protects surfaces from damage, this nailer prioritizes the safety and quality of the user experience.

Moreover, the magazine capacity of the D551H allows for numerous fasteners to be loaded at once, reducing the frequency of reloading during extended use. This feature significantly increases efficiency, particularly in demanding work environments.

The Ryobi D551H is also compatible with a variety of accessories and attachments, enhancing its versatility. Whether users are tackling a home improvement project or engaging in professional construction tasks, the D551H is engineered to meet diverse demands with ease and reliability.

In summary, the Ryobi D551H delivers a powerful, user-friendly experience with its impressive features, advanced technologies, and commitment to safety. Ideal for both seasoned professionals and those new to woodworking, this pneumatic nailer is a robust tool designed to simplify tasks and enhance productivity on any project.