Ryobi D550H manual Mode Depthselector Gauge ROD LOCK-ON Button, Chuck

Page 8

FEATURES

MODE

DEPTHSELECTOR

GAUGE ROD

LOCK-ON

BUTTON

	HANDLE	SWITCH
CHUCK	ASSEMBLY	TRIGGER
CHUCK

Fig. 1

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

Image 8

Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaAdditional Safety Rules Specific Safety RulesService Symbols Symbol Name DESIGNATION/EXPLANATIONSpecifications UnpackingApplications InstructionsFeatures Mode Depthselector Gauge ROD LOCK-ON Button ChuckOperation Inserting BitsRemoving Bits Chuck Jaws Drill BIT Chuck Collar Right WrongAdjusting the Handle Assembly Adjusting the Depth Gauge RODAdjusting the Drill Mode Handle Assembly Adjust Depth Gauge RODAdjusting the Speed Changing the RotationLOCK-ON Button Switch Trigger Turning the Hammer Drill ON/OFFLocking on DrillingMaintenance GeneralLubrication Helpful TipsMallet Chuck Jaws HEX KEY Screwdriver Removing the ChuckTightening the Chuck Page Service Model NO. and Serial no