Ryobi HD1800M manual Charger Rules

Page 5

SPECIFIC SAFETY RULES

CHARGER RULES

Before using battery charger, read all instructions and cautionary markings in this manual, on bat- tery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce risk of injury, charge only nickel-cad- mium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not use charger outdoors. Following this rule will reduce the risk of electric shock, fire, or serious per- sonal injury.

Do not expose charger to rain or snow. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will re- duce the risk of electric shock, fire, or serious personal injury.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury.

Do not abuse the cord. Never carry the charger by the cord or yank it to disconnect it from the recep- tacle. Keep the cord from heat, oil, and sharp edges. Following this rule will reduce the risk of electric shock or fire.

An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is properly wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet)

25'

50'

100'

Cord Size (AWG)

16

16

16

Note: AWG = American Wire Gage

Do not operate charger with a damaged cord or plug. If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not use charger outdoors. Following this rule will reduce the risk of electric shock, fire, or serious per- sonal injury.

Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

WARNING:

Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

5

Image 5
Contents Save this Manual for Future Reference Operators ManualIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesAdditional Safety Rules Additional Cordless Tool RulesCharger Rules Symbol Name DESIGNATION/EXPLANATION SymbolsApplications SpecificationsUnpacking Features Adjustment Ring MAG Tray Screw Holder Battery Pack Keyless Chuck Mode Selector Torque Storage Area DirectionAdjusting the Auxiliary Handle Assembly AdjustmentsAdjusting the Depth Gauge ROD Adjusting the SpeedChanging the BIT Rotation Adjusting the TorqueHammer Mode Removing Bits Inserting BitsRight Wrong Chuck Jaws LockOperation Defective Battery Pack ChargerCharging Batteries Recharging HOT BatteriesRemoving the Battery Pack Installing the Battery PackBattery Pack Latches Turning ON/OFF the Hammer DrillDrilling Using the LevelsTOP View Level Helpful TipsBattery Disposal MaintenanceGeneral BatteriesTightening the Chuck Removing the ChuckMallet Chuck Jaws HEX KEY ScrewdriverRyobi Technologies INC