Ryobi DP102L manual General Safety Rules, Read ALL Instructions

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS

n KNOW YOUR POWER TOOL. Read the operator’s manual carefully. Learn the applications and limitations as well as the specific potential hazards related to this tool.

n GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT WITH GROUNDED SURFACES. For example: pipes, radiators, ranges, refrigerator enclosures.

nKEEP GUARDS IN PLACE and in good working order.

nREMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

nKEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. DO NOT leave tools or pieces of wood on the tool while it is in operation.

nDO NOT USE IN DANGEROUS ENVIRONMENTS. Do not use power tools in damp or wet locations or expose to rain. Keep the work area well lit.

nKEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or exten- sion cord while operating.

nMAKE WORKSHOP CHILDPROOF with padlocks, master switches, or by removing starter keys.

nDON’T FORCE THE TOOL. It will do the job better and safer at the feed rate for which it was designed.

nUSE THE RIGHT TOOL. Do not force the tool or attach- ment to do a job for which it was not designed.

nUSE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. Use only a cord heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. A wire gauge size (A.W.G.) of at least 16 is recommended for an extension cord 50 feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

nDRESS PROPERLY. Do not wear loose clothing, gloves, neckties, or jewelry that can get caught and draw you into moving parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Also wear protective hair covering to contain long hair.

n ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS. Everyday eyeglasses have only impact- resistant lenses, they are NOT safety glasses.

nSECURE WORK. Use clamps or a vise to hold work when practical, it is safer than using your hand and frees both hands to operate the tool.

nDO NOT OVERREACH. Keep proper footing and balance at all times.

nMAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.

nDISCONNECT TOOLS. When not in use, before servicing, or when changing attachments, blades, bits, cutters, etc., all tools should be disconnected from power source.

nAVOID ACCIDENTAL STARTING. Be sure switch is off when plugging in any tool.

nUSE RECOMMENDED ACCESSORIES. Consult the operator’s manual for recommended accessories. The use of improper accessories may result in injury.

nNEVER STAND ON TOOL. Serious injury could occur if the tool is tipped.

nCHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.

nUSE THE RIGHT DIRECTION OF FEED. Feed work into a blade, cutter, or sanding spindle against the direction or rotation of the blade, cutter, or sanding spindle only.

nNEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER OFF. Don’t leave tool until it comes to a complete stop.

nPROTECT YOUR LUNGS. Wear a face or dust mask if the cutting operation is dusty.

nPROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.

nDO NOT ABUSE CORD. Never carry tool by the cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

nUSE OUTDOOR EXTENSION CORDS. When tool is used outdoors, use only extension cords with approved ground connection that are intended for use outdoors and so marked.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction WarrantyRead ALL Instructions General Safety RulesFluence of DRUGS, ALCOHOL, or ANY MEDICA- Tion Component is in Contact with the WorkpieceSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsService Electrical Connection Speed and WiringElectrical Extension CordsAnti-Kickback Pawls radial arm and table saws Glossary of TermsHandle Adjustment Vise Base FeaturesProduct Specifications Worklight ON/OFF Switch Switch KEYTools Needed Chuck Adjustment Handle Table Assembly HEX KEY Feed HandlesLoose Parts AA BatteriesUnpacking AssemblyAttaching Column Assembly to Base Column Assembly HEX BoltShaft Installing Table AssemblySlot Adjustment Handle SET Screw Assembly Assembly Gear Rack Base Collar Threaded Hole Lock HandleBulb Installing CHUCK, Head ASSEMBLY, and Feed HandlesINSTALLING/CHANGING Worklight Bulb Chuck Scrap Wood Spindle Head AssemblyMounting Bolts Base INSTALLING/CHANGING Laser BatteriesBattery Compartment Cover AA Batteries Head Assembly Mounting the Drill PressCHECKING/ADJUSTING Laser Alignment Laser HousingLaser Adjustment Knob Power Switch OperationApplications Table Rotation Installing and Removing BitsChuck KEY KEY Hole Assembly Lock Handle Wrong SELF-EJECTING Chuck KEYDrilling Drilling TipsVise HEX Bolt Adjusting Depth Gauge AdjustmentsAdjusting Table Height Adjusting Table BevelDrive Belt Spindlemotor Pulleypulley Tension Bolt Changing SpeedsMaintenance Problem Possible Cause Solution TroubleshootingPage Service Model NO. and Serial no
Related manuals
Manual 26 pages 43.89 Kb

DP102L specifications

The Ryobi DP102L is a highly regarded drill press that provides both novice and experienced woodworkers with a reliable and robust tool for various projects. Known for its versatility and power, this drill press excels in both function and design.

One of the main features of the Ryobi DP102L is its 10-inch swing, which allows for the drilling of larger workpieces without any hassles. The adjustable table can easily be tilted and locked to accommodate angled drilling, enhancing the versatility for different applications. This feature is particularly valuable in woodworking, metalworking, and other crafts that require precision.

The motor is another focal aspect, equipped with a powerful 1/2 HP motor that operates at speeds of 620 to 3100 RPM. This range allows users to choose the optimal speed for their specific drilling task, whether it involves using larger bits or fine-tuning for intricate designs. The variable speed control adds a layer of convenience and efficiency, ensuring that users can tackle a variety of materials with ease.

One groundbreaking technology featured in the Ryobi DP102L is its laser guide system. This innovative addition projects a laser beam onto the workpiece, enabling users to see exactly where the drill bit will make contact. This feature eliminates guesswork, allowing for precision drilling and enhancing overall accuracy. The laser guide is especially useful when working with delicate or intricate pieces that demand attention to detail.

Additionally, the DP102L has an integrated depth stop, which permits users to pre-set the maximum drilling depth. This characteristic ensures uniformity in drilled holes, making it an essential feature for projects that require consistent results. The depth stop mechanism is straightforward and easily adjustable, catering to both beginners and seasoned artisans.

The Ryobi DP102L also emphasizes user comfort and safety. The heavy-duty base is designed to minimize vibrations while ensuring stability during operation, which is critical for safety and accuracy. Furthermore, the ergonomically designed handle allows for comfortable grip and control, even during extended periods of use.

In summary, the Ryobi DP102L drill press combines powerful performance, innovative technology, and user-friendly features, making it an ideal choice for anyone in need of a reliable drilling solution. Its combination of versatility, precision, and comfort ensures it can handle a wide array of applications, establishing it as a valuable addition to any workshop.
Top Page Image Contents