Ryobi RB101 manual Unpacking, Applications, Instructions, Packing List

Page 7

UNPACKING

INSTRUCTIONS

When unpacking the buffer/polisher:

￿Carefully remove the tool and accessories from the box.

￿Make sure that all items listed in the packing list are included.

￿Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

￿Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.

￿If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

WARNING:

If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

The buffer/polisher should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury.

PACKING LIST

10 in.(254 mm) Buffer/Polisher

1 Application bonnet

1 Polishing bonnet Operator’s Manual Warranty Registration Card

APPLICATIONS

You may use the buffer/polisher on the surfaces listed below:

￿Car

￿Boat

￿RV

￿Personal Aircraft

￿Motorcycle

￿Hardwood floors

￿Large furniture

Page 7

Image 7
Contents Save this Manual for Future Reference Operators ManualIntroduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesAdditional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsElectrical Connection SpecificationsElectrical Double InsulationPacking List UnpackingApplications InstructionsFeatures Apply Polish to the Application Bonnet OperationPrepare the Surface Attach the Application BonnetApply Polish to Surface Application of Liquid PolishChange to Buffing Bonnet Troubleshooting MaintenanceRyobi Technologies INC