FEATURES
KNOW YOUR BUFFER/POLISHER
See Figure 1.
Before using the buffer/polisher, familiarize yourself with all operating features and safety requirements.
WARNING:
Do not allow familiarity with your buffer/polisher to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
Your new buffer/polisher is equipped with the following features.
STEERING WHEEL HANDLE
The buffer/polisher has a steering
CORD
The buffer/polisher has a
MOTOR
HOUSING
HANDLE
APPLICATION BONNET
The reusable application bonnet is made of 100% terry cloth.
POLISHING BONNET
The reusable polishing bonnet is made of synthetic tufted material.
FOAM PAD
The foam pad is 10 in. (254 mm) in diameter.
ON/OFF SWITCH
The on/off switch is within reach of the operator’s thumb.
MOTOR HOUSING
The air vent for the motor is located on top of the motor housing.
AIR VENT
ON/OFF
SWITCH
CORD
FOAM PAD
Fig. 1
Page 8