|
|
| SPECIFICATIONS | |
|
|
|
|
|
|
| Oscillating Range | 5/8 in. (15.9 mm) | |
|
|
|
|
|
|
| Oscillations Per Minute | 58 OPM | |
|
|
|
|
|
|
| Spindle Size | 1/2 in. (12.7 mm) | |
|
|
|
|
|
|
| No Load Speed | 2000 RPM | |
|
|
|
|
|
|
| Input | 120 Volts, 60 Hz, AC only, 3.5 Amps | |
|
|
|
|
|
|
| Weight | 49 lbs. (22.2 kg) | |
|
|
|
| |
|
|
| UNPACKING | |
|
|
|
|
|
INFORMATION
We have shipped the oscillating spindle sander completely assembled and ready to use with a 1 in. (25.4 mm) rubber spindle, 7/8 in. (22.2 mm) upper spindle washer, 1 in. (26 mm) throat plate, and 80 grit 1 in. (25.4 mm) sanding sleeve installed on the spindle.
■Remove the loose parts from the box. Make sure that all items listed in the loose parts list are in- cluded.
■Remove the packing materials from around the tool.
■Lift the tool carefully from the box and place it on a level work surface.
NOTE: The sander is heavy. Ask for assistance if necessary.
■Do not discard the packing material until you have carefully inspected the tool, identified all loose parts, and satisfactorily operated the tool.
4 | 5 |
■If any parts are damaged or missing, please call
■Inspect all parts carefully to make sure no breakage or damage occurred during shipping.
WARNING:
If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in serious personal injury.
LOOSE PARTS LIST
1.Sanding sleeves, 50, 80, 150 grit (17)
2.Rubber spindles (4)
3.Throat plates (5)
4.Upper spindle washers (2)
5.Wrench
3
12
6