Ryobi RS280 specifications Maintenance, Optional Accessories, General, Lubrication

Page 11

MAINTENANCE

WARNING:

When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.

GENERAL

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required.

When electric tools are used on fiberglass boats, sports cars, wallboard, spackling compounds, or plaster, it has been found that they are subject to accelerated wear and possible premature failure, as the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, it is not recommended that this tool be used for extended work on any fiberglass material, wallboard, spackling compounds, or plaster. During any use on these materials it is extremely important that the tool is cleaned frequently by blowing with an air jet.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

OPTIONAL ACCESSORIES

The following recommended accessories are current and were available at the time this manual was printed:

4600040

40 Grit Sanding Disc

5 Per Pack

4600150

150 Grit Sanding Disc

5 Per Pack

4600060

60 Grit Sanding Disc

5 Per Pack

4600220

220 Grit Sanding Disc

5 Per Pack

4600080

80 Grit Sanding Disc

5 Per Pack

4600320

320 Grit Sanding Disc

5 Per Pack

4600100

100 Grit Sanding Disc

5 Per Pack

4600503

Conversion Pad

2 Per Pack

All individual sanding grits are available in handy five sheet packs.

Page 11

Image 11
Contents Thank YOU for Buying a Ryobi Random Orbit Sander Save this Manual for Future ReferenceRules for Safe Operation Table of ContentsKeep Guards in Place and in working order Read ALL InstructionsWhen Servicing USE only Identical Ryobi Replacement Parts Packing List UnpackingFeatures Operation See Figures 4 Removing Sanding Disc Before StorageTo Attach Conversion PAD and Velcro Type Sanding Disc Dustless SandingExtension Cords To Install Dust BOXTabs To Install Dust BOX Removing Dust BOXSee Figures 6 Front Handle TAB to Remove To InstallPreparing for Operation SandingLubrication MaintenanceOptional Accessories GeneralRyobi Sander Model Number RS280 Parts List Double Insulated